After viewing previous lectures on seismicity you have basic understanding of earthquakes. Let’s have a further look at what this means for buildings and its foundations. This introduction lecture on geotechnical engineering by Carlos Merino discusses the behaviour of foundations under seismic loading and some more advanced topics, such as soil structure interaction.
UPT. Perpustakaan Universitas Syiah Kuala published via YouTube.com
Creative Commons License
Fundamentals of Electrical Engineering I
The text focuses on the creation, manipulation, transmission, and reception of information by electronic means. Contents: 1) Introduction. 2) Signals and Systems. 3) Analog Signal Processing. 4) Frequency Domain. 5) Digital Signal Processing. 6) Information Communication. 7) Appendices: Decibels; Permutations and Combinations, Frequency Allocations.
A First Course in Electrical and Computer Engineering
Louis Scharf, Daniel Williamson, C. Sidney Burrus, Richard Baraniuk
An introduction to solid state device including field effect and bipolar transistors. Properties of transmission lines and propagating E&M waves.
Introduction To Linear, Time-Invariant, Dynamic Systems For Students Of Engineering
Permission of the author is granted for reproduction in any form of this book or any part of this book, provided that there is appropriate attribution, for example, by a citation in the References section of a technical article, and provided that the reproduction is not made for the purpose of charging a fee to users (e.g., students in a class) beyond the cost of reproduction. However, plagiarism from this book is prohibited, and any use of the material in this book to produce profit or income beyond the cost of reproduction is prohibited.
Department of Aerospace and Ocean Engineering (AOE)
Project Management For Instructional Designers
Project Management for Instructional Designers (PM4ID) is – as the name suggests – a book about project management tailored specifically for instructional designers. This book is a revise / remix of a pre-existing, openly licensed project management textbook which was donated to the commons by a benefactor that desires to be attributed as Anonymous
In the modern world of ever-advancing technologies, actual tests of products and processes are more and more often preceded, if not replaced, by computer modeling. This saves the time and resources required for actual tests, and enables a better understanding of processes that occur in the course of tests. Preliminary computer modeling favors prudent planning of experiments. Calculations in thermal analysis are used everywhere, for example, in estimating the efficiency of thermal insulation of pipelines and in estimating the critical overheating conditions for some chemical substances under which their decomposition, self-heating, explosion, and so forth, occurs. This methodical manual focuses on a small aspect of calculations in thermal analysis dealing with constructing kinetic models from thermogravimetry and differential scanning calorimetry experimental data.
Agile Processes in Software Engineering and Extreme Programming
A retrospective is a standard agile meeting practice designed for agile software teams to reﬂect and tune their process. Despite its integral importance, we know little about what aspects are focused upon during retrospectives and how reﬂection occurs in this practice. We conducted Case Study research involving data collected from interviews of sixteen software practitioners from four agile teams and observations of their retrospective meetings. We found that the important aspects focused on during the retrospective meeting include identifying and discussing obstacles, discussing feelings, analyzing previous action points, identifying background reasons, identifying future action points and generating a plan. Reﬂection occurs when the agile teams embody these aspects within three levels of reﬂection: reporting and responding, relating and reasoning, and recon structing. Critically, we show that agile teams may not achieve all levels of reﬂection simply by performing retrospective meetings. One of the key contributions of our work is to present a reﬂection framework for agile retrospective meetings that explains and embeds three levels of reﬂection within the ﬁve steps of a standard agile retrospective. Agile teams can use this framework to achievebetter focus and higher levels of reﬂection in their retrospective meetings
The Art of Insight in Science and Engineering
Science and engineering, our modern ways of understanding and altering the world, are said to be about accuracy and precision. Yet we best master the complexity of our world by cultivating insight rather than precision. We need insight because our minds are but a small part of the world. An insight uniﬁes fragments of knowledge into a compact picture that ﬁts in our minds. But precision can overﬂow our mental registers, washing away the understanding brought by insight. This book shows you how to build insight and understanding ﬁrst, so that you do not drown in complexity.
Small-signal stability, control and dynamic performance of power systems
The main purpose of this book is to introduce the graduate engineer to the concepts and applications of small-signal analysis and controller design for the enhancement of the dynamic performance of multi-machine power systems. To this end, the analyses of the control and dynamic performance are illustrated by examples based on an interconnected highvoltage system comprising fourteen generating stations and various types of FACTS devices. An emphasis in the book is on more recent theoretical developments and application to practical issues which are amenable to small-signal analysis using a comprehensive software package. In addition, the tools in - and features of - such a software package for analysis and controller design are illustrated.
Published in 1989 by Prentice-Hall, this book is a useful resource for educators and self-learners alike. The text is aimed at those who have seen Maxwell's equations in integral and differential form and who have been exposed to some integral theorems and differential operators. A hypertext version of this textbook can be found here. An accompanying set of video demonstrations is available below. These video demonstrations convey electromagnetism concepts. The demonstrations are related to topics covered in the textbook. They were prepared by Markus Zahn, James R. Melcher, and Manuel L. Silva and were produced by the Department of Electrical Engineering and Computer Science at the Massachusetts Institute of Technology. The purpose of these demonstrations is to make mathematical analysis of electromagnetism take on physical meaning. Based on relatively simple configurations and arrangements of equipment, they make a direct connection between what has been analytically derived and what is observed. They permit the student to observe physically what has been described symbolically. Often presented with a plot of theoretical predictions that are compared to measured data, these demonstrations give the opportunity to test the range of validity of the theory and present a quantitative approach to dealing with the physical world. The short form of these videos contains the demonstrations only. The long form also presents theory, diagrams, and calculations in support of the demonstrations.
VT Publishing, Virginia Tech University Libraries
First published in 1968 by John Wiley and Sons, Inc., Electromechanical Dynamics discusses the interaction of electromagnetic fields with media in motion. The subject combines classical mechanics and electromagnetic theory and provides opportunities to develop physical intuition. The book uses examples that emphasize the connections between physical reality and analytical models. Types of electromechanical interactions covered include rotating machinery, plasma dynamics, the electromechanics of biological systems, and magnetoelasticity.
This book is the direct result of nearly five years of work on the Energy Vulnerability and Urban Transitions in Europe project (www.urbanenergy.org), generously supported by a Starting Grant from the European Research Council—under the European Union’s Seventh Framework Programme (FP7/2007–2013/ERC grant agreement number 313478). The project, commonly known under the acronym EVALUATE (Energy Vulnerability and Urban Transitions in Europe project), has sought to transform scientific knowledge and policy action on energy poverty—a form of material deprivation that affects billions of people across the world. EVALUATE is a multi-sited study, involving extensive research across a variety of cities and countries. Focusing primarily on four Central and Eastern European cities (Budapest, Gdań sk, Prague and Skopje) the project has undertaken a customized survey with 2435 households, supplemented with insights from in-depth household interviews, ‘energy diaries’ and energy efficiency audits in the homes of approximately 160 households living in the four cities. EVALUATE has entailed 195 expert interviews in a much wider range of sites across the world, as well as an analysis of micro-data from national and European Union surveys of energy poverty. It has led to more than 200 dissemination activities, while laying the basis for the European Energy Poverty Observatory as well as a new European Co-operation for Science and Technology Action on ‘European Energy Poverty: Agenda Co-Creation and Knowledge Innovation’.
This open access book disseminates some of the results of the European H2020 AiRT Project (Technology transfer of RPAs for the creative industry). In particular, it presents findings related to mitigating safety and security concerns when civil drones are piloted by the service sector (mainly, the creative industry). European policies regarding drones generally focus on outdoor drones, but they are also used indoors. Moreover, a number of European countries have fragmented regulations on drone use, and as a result, European institutions are attempting address these issues. This work is based on a detailed study of the European policies, a comparative analysis of the regulation in various European countries, an analysis of the drone sector in Europe, and primary data from members of the creative industry. The authors created focus groups in Spain, the UK and Belgium in order to discuss with the creative industry the concerns on safety and security when using civil drones for their work. Based on these results, the book offers advice to the European industry, as well as new insights for academics and policymakers.
Fundamentals of Infrastructure Management
The authors believe this free of charge book, Fundamentals of Infrastructure Management, will expand the impact of the material and help improve the practice of infrastructure management. By ‘free of charge,’ we mean that the material can be freely obtained, but readers should devote time and effort to mastering the material. We have provided problem assignments for various chapters, and we strongly urge readers to undertake the problems as a learning experience. This book grew out of a decade of co-teaching a course entitled ‘Infrastructure Management’ at Carnegie Mellon University. Our teaching philosophy was to prepare students for work in the field of infrastructure management. We believe that infrastructure management is a professional endeavor and an attractive professional career. The book is co-authored by two accomplished engineers - each representing professional practice, academic research and theoretical evaluation. Their collective strengths are presented throughout the text and serve to support both the practice of infrastructure management and a role for infrastructure management inquiry and search. Importantly, both co-authors have academic research interests (and a number of research publications) on various topics of infrastructure management. That said, the primary audience for this book is expected to be professionals intending to practice infrastructure management, and only secondarily individuals who intend to pursue a career of research in the area. The text draws examples and discusses a wide variety of infrastructure systems, including roadways, telecommunications, power generation, buildings and systems of infrastructure. We have found that some common fundamentals of asset management, analysis tools and informed decision-making are useful for a variety of such systems. Certainly, many infrastructure managers encounter a variety of infrastructure types during their professional careers. Moreover, due to the functional inter-dependencies of different infrastructure systems, it is certainly advantageous for managers of one infrastructure type to understand other types of infrastructure. For example, roadway managers rely upon the power grid for traffic signal operation.
Math, Numerics, & Programming (for Mechanical Engineers)
All readings are from the textbook: Masayuki Yano, et al. Math, Numerics, and Programming (for Mechanical Engineers). V2.1, August 2013. Files for each available unit are provided in the following table, courtesy of the authors. The entire textbook is available for download as a single file. Students should read all of the assignments for the unit before proceeding to the associated Problem Sets and the MATLAB® Tutorials. In general, students should skip the advanced material in the textbook. This advanced material is indicated either by blue shading or by blue "Advanced Material" bookends.
This book covers Direct Current (DC) circuit theory and is broken up into three modules. Module 1 covers the basics for circuits that include DC sources (voltage or current) and resistors. Even though Module 1 is not very difficult, it forms the foundation for more complicated topics in Module 2 and 3 so it is important to have a firm grasp of all Module 1 topics before moving on. Module 2 covers more difficult problem solving techniques for circuits that include only DC sources and resistors. Module 3 introduces capacitors and inductors. These non-linear reactive components are analyzed in the transient and steady state regions in circuits with DC sources in Module 3. There are two follow-on eBooks in this 3-part series. They are AC Circuits (published in 2017) and Electromechanical Systems (Coming in 2018).
Energy Poverty : (Dis)Assembling Europe’s Infrastructural Divide
EVALUATE is a multi-sited study, involving extensive research across a variety of cities and countries. Focusing primarily on four Central and Eastern European cities (Budapest, Gdańsk, Prague and Skopje) the project has undertaken a customized survey with 2435 households, supplemented with insights from in-depth household interviews, ‘energy diaries’ and energy efficiency audits in the homes of approximately 160 households living in the four cities. EVALUATE has entailed 195 expert interviews in a much wider range of sites across the world, as well as an analysis of micro-data from national and European Union surveys of energy poverty. It has led to more than 200 dissemination activities, while laying the basis for the European Energy Poverty Observatory as well as a new European Co-operation for Science and Technology Action on ‘European Energy Poverty: Agenda Co-Creation and Knowledge Innovation’
Beyond Lean: Simulation in Practice, Second Edition
Lean thinking, as well as associated processes and tools, have involved into a ubiquitous perspective for improving systems particularly in the manufacturing arena. With application experience has come an understanding of the boundaries of lean capabilities and the benefits of getting beyond these boundaries to further improve performance. Discrete event simulation is recognized as one beyond-the-boundaries of lean technique. Thus, the fundamental goal of this text is to show how discrete event simulation can be used in addition to lean thinking to achieve greater benefits in system improvement than with lean alone. Realizing this goal requires learning the problems that simulation solves as well as the methods required to solve them. The problems that simulation solves are captured in a collection of case studies. These studies serve as metaphors for industrial problems that are commonly addressed using lean and simulation.
Building Maintenance & Construction: Tools and Maintenance Tasks
Building Maintenance & Construction: Tools and Maintenance Tasks introduces and develops knowledge of basic building maintenance tools and materials, applied skills and techniques, industry health and safety tandards, and preventive maintenance and troubleshooting practices required by employers for entry-level positions in the building trades and facilities maintenance fields.
Operational Amplifiers & Linear Integrated Circuits: Theory and Application / 3E
Operational Amplifiers , Linear Integrated Circuits
Before we can begin our study of the operational amplifier, it is very important that certain background elements be in place. The purpose of this chapter is to present the very useful analysis concepts and tools associated with the decibel measurement scheme and the frequency domain. We will also be examining the differential amplifier that serves as the heart of most operational amplifiers. With a thorough working knowledge of these items, you will find that circuit design and analysis will proceed at a much quicker and more efficient pace. Consider this chapter as an investment in time, and treat it appropriately.
Semiconductor Devices: Theory and Application
Just as the late eighteenth through nineteenth centuries are known as the industrial age due to the rise of mechanization, the twentieth century can be referred to as the beginning of the electronic age. The first half of the century was dominated by electronic vacuum tubes that made possible devices such as radio, television, radar and long distance telephone. The technology of the vacuum tube was displaced mid-century by the introduction of solid-state semiconductors. The first working prototype transistor was invented at Bell Labs in 1947 by John Bardeen, Walter Brattain and William Shockley. This device, properly referred to as a point contact transistor, was quickly superseded by the bipolar junction transistor, a major topic of this text.
Electrical Engineering Technology .Mohawk Valley Community College
This eBook was written as the sequel to the eBook titled DC Circuits, which was written in 2016 by Chad Davis. This eBook covers Alternating Current (AC) circuit theory as well as a brief introduction of electronics. It is broken up into seven modules. Module 1 covers the basic theory of AC signals. Since only DC sources are used in the first eBook, details of AC signals such as sinusoidal waveforms (or sine waves), square waves, and triangle waves are provided. Module 2, titled AC Circuits Math Background, covers the mathematics background needed for solving AC circuit problems. The background material in Modules 1 and 2 are combined in Module 3 to solve circuits with AC sources that include resistors, inductors, and capacitors (RLC circuits).
Introduction to Water Systems Technology
Water Systems and Technology is a program designed to provide the student with enough information to build a successful and lasting career in the water and wastewater industry. It is a program that has been developed by professionals within the industry and within academia. Upon successful completion of the program and after completing any required general education course work, the student can earn an Associate of Science degree in Water Systems Technology. In addition, each course provides supplemental course work hours required for renewal of existing certifications in the water and wastewater industries and many provide specialized training coursework to qualify students to take state certification exams. The program has several general topic course options, includes coursework related to waterworks mathematics, and has specialized courses covering water distribution, water treatment, and wastewater
This chapter presents a brief introduction on the water sources that are available for potable supply; detailed information is presented in Water 032 (Water Supply). Understanding the water sources used for potable application is important to appreciate the variety of contaminants that can be present in water, and assess their characteristics.
A water distribution system is nothing more than a network of components designed to deliver water from a source to a user. It can be thought of as an array of piping networks and various pieces of equipment taking water from one location and delivering it to another. As a comparison, the human body has a number of different “distribution” systems. The circulatory system for example distributes blood throughout the body through a series of organs. You can also look at our roadways as a “distribution system”. You leave your house and follow a path to a destination. In between are turns, signals, signs, etc. Understanding this general description of water distribution systems by no means undermines the complexity of delivering safe and reliable drinking water to consumers.
Water Treatment Plant Operation Processes I
A very finite amount of water on our planet (0.34%) is available to treat for human consumption. Knowing where the water comes from assists certified operators in treating raw source water to make it potable. Newer technology has been developed to treat salinized or salty water found in the ocean. These treatment methods are still extremely expensive and not widely accessible. Supplying water to the public is an extremely important function in society as water is the basic building block of life. Because water quality is of the utmost importance new regulations and water quality standards are continually changing and evolving to make sure the public has safe sources of drinking water. The first drinking water standards were signed into law by President Ford in 1974 and it was known as the Safe Drinking Water Act (SDWA). Throughout the text new concepts will be introduced and an acronym will be given and used subsequently. You are going to learn to love acronyms if you become a certified operator. We use them quite frequently!
Water Treatment and Plant Operation Processes II
The basic objective in the operation of drinking water treatment plants is to produce a drinking water that is safe and aesthetically pleasing at a reasonable cost with respect to capital as well as operation and maintenance. From a public health perspective, production of a safe drinking water is one that is free of harmful microorganisms and toxic materials, and this object is the first priority. It is also important to produce a high-quality, water that appeals to the consumer. Generally, the water must be clear, free of turbidity, colorless, and free of objectionable tastes and odors. Consumers also show a preference for water supplies that do not stain plumbing fixtures and clothes, do not corrode plumbing fixtures and piping, and do not leave scale deposits or spot glassware.
Proper wastewater treatment and disposal is essential for the vitality of a functioning society. Without it, a community’s environment can be severely polluted and the health of the public is at great risk. To better understand the relationship between wastewater treatment and water treatment and distribution, examine the urban water cycle (link). Like the typical hydrologic cycle, which shows the natural movement of water in the environment, the urban water cycle shows how water is moved in an urban environment. In some cases, as shown is FIG XX, (show detailed picture of typical community water/wastewater infrastructure) wastewater that has been treated by a wastewater treatment plant will be discharged back into a natural water body. Water from that water body will then be used by downstream communities as source water for their water treatment plants. If either of these two treatment facilities are not operating to current regulations and standards, public health is at risk. In addition, if the wastewater treatment facility is not operating properly there can also be additional environmental damage to the water body
The wastewater collection system is the network of pipes that convey the wastewater from households and business to a wastewater treatment facility. Each customer will have a lateral connected to the main sewer lines. In order to keep sediment from settling out in the collection system and causing a blockage the pipe is sloped to ensure a velocity of 2 ft/sec. A majority of the system will utilize the slope of the pipe and gravity so the water travels downhill. However, that is not always feasible and when needed a lift station will be installed. The lift station is comprised of a wet well where the wastewater is collected and pumps the water to a higher elevation where it can then resume to flow by gravity. The portion of the pressure pipe that is connected to the lift station is called a force main. The force main is always under pressure and the wastewater completely fills the pipe. Where a gravity sewer has minimal pressure and under normal conditions only about ⅓ of the pipe is filled with wastewater.
The converting (or cancelling) of units is the most important concept in waterworks mathematics. You may be working with million gallons, cubic feet, acre feet, feet per second, gallons per minute, milligrams per liter, pounds per gallon, yard, ounce, parts per billion, etc., etc., etc. Units are the “driver” for problem solving in many waterworks math questions. The reason for this has to do with how processes are measured. For example, many water meters measure usage in hundred cubic feet. However, when Utility Managers report total usage by a class of customers it is typically expressed as acre feet or million gallons. Another example can be when dosage calculations are performed. Many times flow rates are measured as gallons per minute, but dosage computations require million gallons per day. These are just a couple of examples demonstrating the common conversion between units. In an introductory water mathematics course unit conversion is typically explained in a “unit by unit” break down. Here we are converting from cfs (cubic feet per sec) to gpm (gallon per minute).
You’re about to understand water demand and water supply more deeply. This understanding is going to change how you look at your water bill, grass in your yard and around town, and all those canals you see while driving around in California. Understanding the connection between demand and supply is critical to anyone working in the water industry today. Water demand is our need and use of water. Water supply refers to our sources of water. This textbook has three primary parts. In Part One, you will learn foundational concepts in water supply, including the water cycle, water management concepts, water rights and stakeholder concepts.
This first general textbook An introduction to ontology engineering has as main aim to provide the reader with a comprehensive introductory overview of ontology engineering. A secondary aim is to provide hands-on experience in ontology development that illustrate the theory. The book is divided into three blocks: Block I: logic foundations for ontologies both regarding the languages (mainly First Order predicate Logic, Description Logics, and OWL) and automated reasoning. Block II: developing good ontologies with methods and methodologies, the top-down approach with foundational ontologies, and the bottom-up approach to extract as much useful content as possible from legacy material.
Pipeline projects can be small jobs requiring only a few sticks of pipe. Or, they can be extensive jobs covering several miles or more. Regardless of the size of the job, it is important to properly plan. Preparing the pipe at the job site is an important aspect of job preparation. The pipe should be placed as close to the trench as possible. This makes it easier for the pipe to be accessed and placed into the trench. String the pipe on the opposite side of the trench as the dirt (spoils) that is being excavated and should be located away from traffic and heavy equipment. The bells should be located in the direction of installation and only enough pipe should be laid out for a days work. It is also important that the pipe is protected from rolling into the trench or away from the job site.
Water Systems and Technology is a program designed to provide the student with enough information to build a successful and lasting career in the water and wastewater industry. It is a by professionals within the industry and within academia. Upon successful completion of the program and after completing any required general education course work, the student can earn an Associate of Science degree in Water Systems Technology. In addition, each course provides supplemental course work hours required for renewal of existing certifications in the water and wastewater industries and many provide specialized training coursework to qualify students to take state certification exams. The program has several general topic course options, includes coursework related to waterworks mathematics, and has specialized courses covering water distribution, water treatment, and wastewater.
https://www.canyons.edu/Offices/DistanceLearning/OER/Documents/Water%20020%20Text%20- 203rd%20Edition%20(2).pdf
The Delft Sand, Clay & Rock Cutting Model
This book gives an overview of cutting theories for the cutting of sand, clay and rock as applied in dredging engineering. In dredging engineering in general sand, clay and rock are excavated with buckets of bucket ladder dredges, cutter heads of cutter suction dredges, dredging wheels of wheel dredges, drag heads of trailing suction hopper dredges, clamshells, backhoes and other devices. Usually the blades have a width much larger than the layer thickness of the cut (2D process) and the blade angles of these devices are not too large in the range of 30°-60°. Although clamshells and backhoes may have blade angles around 90°when they start cutting. Other devices like drill bits of oil drilling devices,blades of tunnel boring machines,ice berg scour and the bull dozer effect in front of a drag head may have cutting angles larger than 90°. In such a case a different cutting mechanismis encountered, the so called wedge mechanism
HYDRAULICS AND ELECTRICAL CONTROL OF HYDRAULIC SYSTEMS
Differentiate between fluid power systems and mechanical or electrical systems Differentiate between hydraulic and pneumatic systems with respect to the fluid medium employed, characteristics, capacity, performance, and cleanliness Describe a basic fluid power system in terms of power conversion. Describe the role of a prime mover like a motor or internal combustion engine in a fluid power system.Draw the schematic symbol for a motor and internal combustion engine. Describe the role of a pump in a fluid power system. Draw the schematic symbol for a pump and reservoir.Describe what properties pressure, flow rate, and valve position influence in a fluid power system. Describe Pascal’s Law and the formula used to relate force, pressure, and area.Describe the role of an actuator in a fluid power system. Draw the schematic symbol for a cylinder and hydraulic motor.
Building information - representationand management
Building information,, representationand management
This book is about the foundations and principles of building information, its representation and management. It does not tell you which software or policies to choose for representing buildings and managing the resulting information. In fact, the book argues that one should not start with practical steps before fully understanding the reasoning behind any such choice. The basis of this reasoning comprises the structure of information and of the representations that contain it, the purposes of managing information in the context of these representations and the processes in which the representations are used; in a nutshell, how information relates to a specific domain. Without adequate reasoning that takes into account all syntactic, semantic and pragmatic aspects, adopting one software or another, implementing one practical measure or another simply subjugates information processing to some prescriptive or proscriptive framework that may be unproductive, incompatible or inappropriate for the domain.
Digital Circuit Projects: An Overview of Digital Circuits Through Implementing Integrated Circuits - Second Edition
Digital circuits, often called Integrated Circuits or ICs, are the central building blocks of a Central Processing Unit (CPU). To understand how a computer works, it is essential to understand the digital circuits which make up the CPU. This text introduces the most important of these digital circuits; adders, decoders, multiplexers, D flip-flops, and simple state machines. What makes this textbook unique is that it puts the ability to understand these circuits into the hands of anyone, from hobbyists to students studying Computer Science. This text is designed to teach digital circuits using simple projects the reader can implement. But unlike most lab manuals used in classes in Digital Circuits or Computer Organization classes, this textbook is designed to remove the barrier of a laboratory infrastructure needed in a face-to-face environment at a college or university. This textbook is designed to be used by the reader to create the circuits in their own homes. The textbook is free. The cost of the kits needed to do the labs is reasonable.
Introduction To MIPS Assembly Language Programming
This book was written to introduce students to assembly language programming in MIPS. As with all assembly language programming texts, it covers basic operators and instructions, subprogram calling, loading and storing memory, program control, and the conversion of the assembly language program into machine code. However this book was not written simply as a book on assembly language programming. The larger purpose of this text is to show how concepts in Higher Level Languages (HLL), such as Java or C/C++, are represented in assembly. By showing how program constructs from these HLL map into assembly, the concepts will be easier to understand and use when the programmer implements programs in languages like Java or C/C++. Concepts such as references and variables, registers, binary and Boolean operations, subprogram execution, memory types (heap, stack, and static), and array processing are covered to clarify the decisions made when implementing HLL. Program control is presented using a mapping from structured programs in pseudo code to help students understand structured programming, and why it exists. Memory access in assembly is presented to high light the difference between references (pointers) and values, and how these impact HLL.
Building Green . Environmental Architects and the Struggle for Sustainability in Mumbai
Building Green explores the experience of environmental architects in Mumbai, one of the world’s most populous and population-dense urban areas and a city iconic for its massive informal settlements, extreme wealth asymmetries, and ecological stresses. Under these conditions, what does it mean to learn, and try to practice, so-called green design? By tracing the training and professional experiences of environmental architects in India’s first graduate degree program in Environmental Architecture, Rademacher shows how environmental architects forged sustainability concepts and practices and sought to make them meaningful through engaged architectural practice. The book’s focus on practitioners offers insights into the many roles that converge to produce this emergent, critically important form of urban expertise. At once activists, scientists, and designers, the environmental architects profiled in Building Green act as key agents of urban change whose efforts in practice are shaped by a complex urban development economy, layered political power relations, and a calculus of when, and how, their expert skills might be operationalized in service of a global urban future.
The Environmental Impact of Sieben Linden Ecovillage
Environmental impact assessment is widely taught and researched, but rarely covers both lifestyle and building construction in a town or neigh-bourhood. This book provides a broad assessment of the environmental impact of the ecovillage Sieben Linden in Germany. The ecovillage was founded in 1997 and has a population of over one hundred people. This book shows how raising the awareness of individuals and adopting a consistent way of community living can be environmentally friendly. This applies both to everyday practices and the way the houses in the ecovillage are built. The tools used to measure the impact are Ecological Footprint and Carbon Footprint methodologies, making use of indicators such as Primary Energy Intensity and Global Warming Potential. Despite the diffi culties encountered by using standardised methodologies, these research tools provide an overall assessment and have allowed comparisons with selected, similar cases and general values from statistic sources.
Bocco, Andrea; Gerace , Martina; Pollini, Susanna
Governing Extractive Industries : Politics, Histories, Ideas
The large-scale extraction of minerals, hydrocarbons, and other natural resources1has long been central to national economies and the global economy. This has been the case in colonial and post-colonial economies alike, and the harnessing of such resources continues to feature prominently in the economic development strategies of many countries. The economic significance of resource extraction can be quantified through data on percentage contribution of oil, gas, and mining to GDP, exports, foreign direct investment, and the public budget (Mosley, 2017). In contrast, the contributions of extractive industries to ‘development’ and ‘inclusive development’ are more uncertain, not least because definitions of these terms differ based on the degree to which analysts emphasize goals of poverty and income inequality, environmental justice, gender equity, or human and citizenship rights. Even those advocating for the role of extractives in economic development and poverty reduction recognize that results have often been ambiguous (Davis, 2009).
In dredging, production estimating is carried out mainly with analytical physical models of the different dredging processes. Slurry transport of settling slurries and cutting processes in sand, clay and rock are already covered in two other books by the author. Other processes like hopper sedimentation and erosion, water jet fluidization, cutter head spillage, pump/pipeline dynamics and clamshell dredging are covered in this Special Topics Edition. New topics may be added in the near future
The goal of this book is to improve your logical-reasoning skills. These skills are also called "critical thinking skills." They are a complex weave of abilities that help you get someone's point, generate reasons for your own point, evaluate the reasons given by others, decide what or what not to do, decide what information to accept or reject, explain a complicated idea, apply conscious quality control as you think, and resist propaganda. Your most important critical thinking skill is your skill at making judgments─not snap judgments that occur in the blink of an eye, but those that require careful reasoning.
3D City Models and urban information: Current issues and perspectives
Many urban or environmental models are defined with the objective of helping practitioners and stakeholders in their decision-making processes. Models which represent in three dimensions the geometric elements of a city are called 3D city models. These models are increasingly used in different cities and countries for an intended wide range of applications beyond mere visualisation. Indeed, unlike maps and drawings, 3D visualisation reflects a view of the environment that a lot of people are familiar with and acts as a communication tool. Non geometrical data (such as social, historic or acoustic data or statistics, for example) can be associated to urban geometrical objects (such as buildings or streets) that can be represented and visualized in 3D, leading to a localization as well as a better understanding of these data. By associating a domain (energy consumption, air quality, etc.) to these 3D models, we obtain richer 3D representations that can be used for simulations and reasoning (visual reasoning).
Νear-Earth space is the region that extends from the middle atmosphere up to the outer radiation belts. This region is of significant interest because of its potentially undesired effects on human life and on technological systems, whose understanding, modeling and prediction require continuous scientific exploration and advances. Consequently, a number of observing systems have been set up to acquire observations from the near-Earth space, producing a wealth of diverse types of data which still need to be homogenized and organized in order to become widely accessible. The exploitation of multi-instrument data from a large number of distributed observing sites is the requirement for accurate predictions of the near-Earth space environment. As the near-Earth space is part of the complex Sun-Earth system, supporting data from the Sun, the interplanetary medium but also from the upper and lower layers of the atmosphere, are needed to drive near-Earth prediction models.
Fundamentals of Microwave and RF Design enables mastery of the essential concepts required to cross the barriers to a successful career in microwave and RF design. Extensive treatment of scattering parameters, that naturally describe power flow, and of Smith-chart-based design procedures prepare the student for success. The emphasis is on design at the module level and on covering the whole range of microwave functions available. The orientation is towards using microstrip transmission line technologies and on gaining essential mathematical, graphical and design skills for module design proficiency. This book is derived from a multi volume comprehensive book series, Microwave and RF Design, Volumes 1-5, with the emphasis in this book being on presenting the fundamental materials required to gain entry to RF and microwave design.
North Carolina State University Libraries
Microwave and RF Design: Radio Systems is a circuits- and systems-oriented approach to modern microwave and RF systems. Sufficient details at the circuits and sub-system levels are provided to understand how modern radios are implemented. Design is emphasized throughout. The evolution of radio from what is now known as 0G, for early radio, through to 6G, for sixth generation cellular radio, is used to present modern microwave and RF engineering concepts. Two key themes unify the text: 1) how system-level decisions affect component, circuit and subsystem design; and 2) how the capabilities of technologies, components, and subsystems impact system design. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
Microwave and RF Design: Transmission Lines
Microwave and RF Design: Transmission Lines builds on the concepts of forward- and backward-traveling waves. Many examples are included of advanced techniques for analyzing and designing transmission line networks with microstrip lines primarily used in design examples. Coupled-lines are an important functional element in microwave circuits, and circuit equivalents of coupled lines are introduced as fundamental building blocks in design. The text and examples introduce the often hidden design requirements of mitigating parasitic effects and eliminating unwanted modes of operation.
Microwave and RF Design: Networks presents the tools and techniques required to analyze and design microwave and RF circuits. Because of the finite speed of light, microwave circuits must be considered to be spatially distributed and so there is not a single ground. As such metrics that can be used to describe power flow are of most use. The topics covered include scattering parameters, signal flow graphs, and Smith charts. Acquiring expertise in these is the biggest barriers to a successful career in microwave and RF engineering
Microwave and RF Design: Modules focuses on the design of systems based on microwave modules. The use of modules has become increasingly important in RF and microwave engineering for rapidly realizing high performance microwave systems. When integration is ultimately to be used, building a system up using modules provides a rapid means of prototyping and testing system concepts. A wide variety of RF modules including amplifiers, local oscillators, switches, circulators, isolators, phase detectors, frequency multipliers and dividers, phase-locked loops, and direct digital synthesizers are considered. Detailed design strategies for synthesizing filters based on parallel coupled lines are presented. The reader will gain an appreciation of design by synthesis.
Advances in Hydro-Meteorological Monitoring
This book presents a reprint of the Special Issue of the journal Water dedicated to “Advances in Hydro-Meteorological Monitoring”. As we planned, as editors, this Special Issue aimed to shed light on the more recent advances in ground observations and remote sensing products, as well as on the benefit that comes from the integration of technological innovation and the development of new ideas in hydrology science. This original objective was achieved, and in the eleven papers collected here the readers can appreciate theoretical and applied contributions dealing with the development and comparison of different monitoring procedures based on ground and satellite data. The papers are arranged with a process-oriented criterion that follows the hydrologic cycle. Starting from soil moisture monitoring from satellites and in-situ, we move to pan evaporimeter measurements. Runoff measurement using advanced methods from both satellites and in the field are then addressed. Three papers are dedicated to rainfall measurement and spatial representation and the two final papers address the problem of systematic errors in snow precipitation measurement and the design of snow measurement networks
Tommaso Moramarco (Ed.) -, Roberto Ranzi (Ed.)
MDPI - Multidisciplinary Digital Publishing Institute
Metals Challenged by Neutron and Synchrotron Radiation
In the past one and a half decades, neutron and synchrotron radiation techniques have come to the forefront as an excellent set of tools for the wider investigation of material structures and properties [1,2], becoming available to a large user community. This holds especially true for metals, which are a fascinating class of materials with both structural and functional applications. With respect to these application classes, metals are used to engineer bridges and automotive engines as well as to exploit magnetic and electric properties in computer storage, optics, and electronics. Both neutron sources and synchrotrons are large user facilities of quantum-beam installations [3] with the implementation of a common accelerator or nuclear reactor-based source, often serving over 50 beamlines simultaneously and even more end stations. Up to a few thousand experiments are undertaken yearly, utilizing specialized beam conditions, sample environments, and detection systems. Their variations range across spectroscopy, diffraction, small-angle scattering, and inelastic scattering for sample sizes ranging from nanometers to meters. Examples of such installations can be found in the Topical Collection Facilities of Metals’ sister journal Quantum Beam Science [3].
Influence of elevated temperatures up to 100 °C on the mechanical properties of concrete
Experiments to characterize the effects of moisture content and temperature on the mechanical properties of concrete were conducted. Based on these experiments, a new overall material model capable of predicting the mechanical behaviour of concrete subject to elevated temperatures up to 100 °C was developed. The material model estimates the time, temperature and moisture dependency of the compressive and tensile strength, creep and shrinkage of concrete.
Modern societies cannot function without information and communications technology (ICT) systems. When ICT systems such as electronic government (e-government) systems, e-payment infrastructures, and mobile phone networks fail,users can still access alternative systems based on older technologies, but these alternatives are rapidly disappearing. E-government services are introduced on the Web to improve services to citizens and to free up the human resources needed to tackle the increasing health care requirements of aging populations.
Technologies for Development: From Innovation to Social Impact
This open access book presents 18 case studies that explore current scientific and technological efforts to address global development issues, such as poverty, from a holistic and interdisciplinary point of view, putting actual impacts at the centre of its analysis. It illustrates the use of technologies for development in various fields of research, such as humanitarian action, medical and information and communication technology, disaster risk-reduction technologies, habitat and sustainable access to energy. The authors discuss how innovative technologies, such as unmanned aerial vehicles for disaster risk reduction, crowdsourcing humanitarian data, online education and ICT-based medical technologies can have significant social impact.
Consideration of Abiotic Natural Resources in Life Cycle Assessments
The book contains a collection of articles dealing with how the extraction of mineral resources can be considered in environmental analyses such as Life Cycle Assessment (LCA). The consumption of resources, e.g., metals, is increasing strongly worldwide. This is associated with more energy use; environmental pollution; and social, economic, and political consequences. An increase is also expected for the coming decades. At the same time, modern products and technologies, even in the field of renewable energies, require a large number of critical raw materials. A crucial question here is the exhaustibility of natural resources.
Habitats and Biota of the Gulf of Mexico: Before the Deepwater Horizon Oil Spill: Volume 1: Water Quality, Sediments, Sediment Contaminants, Oil and Gas Seeps, Coastal Habitats, Offshore Plankton and Benthos, and Shellfish
The Gulf of Mexico is an open and dynamic marine ecosystem rich in natural resources but heavily impacted by human activities, including agricultural, industrial, commercial and coastal development. The Gulf of Mexico has been continuously exposed to petroleum hydrocarbons for millions of years from natural oil and gas seeps on the sea floor, and more recently from oil drilling and production activities located in the water near and far from shore. Major accidental oil spills in the Gulf are infrequent; two of the most significant include the Ixtoc I blowout in the Bay of Campeche in 1979 and the Deepwater Horizon Oil Spill in 2010. Unfortunately, baseline assessments of the status of habitats and biota in the Gulf of Mexico before these spills either were not available, or the data had not been systematically compiled in a way that would help scientists assess the potential short-term and long-term effects of such events
Neutron and Synchrotron radiation methods have matured to become powerful techniques for the study of a vast range of materials, including metals. The characterization methods comprise the categories of diffraction, spectroscopy and imaging, which themselves can alter greatly in detail, to include hundreds of variants, problems and sample environments. In a similar way, their applications to metals and hard condensed matter materials cover disciplines spanning engineering, physics, chemistry, materials science and their derivatives such as geology, energy storage, etc.
Perspectives on European Earthquake Engineering and Seismology: Volume 2
Sustainable Manufacturing: Challenges, Solutions and Implementation Perspectives
General and Civil Engineering --- Materials
This edited volume presents the research results of the Collaborative Research Center 1026 “Sustainable manufacturing - shaping global value creation”. The book aims at providing a reference guide of sustainable manufacturing for researchers, describing methodologies for development of sustainable manufacturing solutions. The volume is structured in four chapters covering the following topics: sustainable manufacturing technology, sustainable product development, sustainable value creation networks and systematic change towards sustainable manufacturing. The target audience comprises both researchers and practitioners in the field of sustainable manufacturing, but the book may also be beneficial for graduate students.
Marginality: Addressing the Nexus of Poverty, Exclusion and Ecology
This book takes a new approach on understanding causes of extreme poverty and promising actions to address it. Its focus is on marginality being a root cause of poverty and deprivation. “Marginality” is the position of people on the edge, preventing their access to resources, freedom of choices, and the development of capabilities. The book is research based with original empirical analyses at local, national, and local scales; book contributors are leaders in their fields and have backgrounds in different disciplines.
Joachim von Braun --- Franz W. Gatzweiler
Sustainable Land Use and Rural Development in Southeast Asia: Innovations and Policies for Mountainous Areas
This book is based on the findings of a long-term (2000-2014) interdisciplinary research project of the University of Hohenheim in collaboration with several universities in Thailand and Vietnam. Titled Sustainable Land Use and Rural Development in Mountainous Areas in Southeast Asia, or the Uplands Program, the project aims to contribute through agricultural research to the conservation of natural resources and the improvement of living conditions of the rural population in the mountainous regions of Southeast Asia.
Environmental Sciences --- General and Civil Engineering --- Geology --
This book compares the lessons learned from a wetland-perspective approach to the changing climate and the requirements of the Water Framework Directive (WFD) with regard to environmental conservation. Examples from Germany and Poland are discussed due to the efficiency of their respective implementations of water conservation policies. Although the general scientific interest in specific issues such as wetlands, climate change, nature conservation and the WFD enjoy a well established position in international environmental research, these four elements are rarely considered together due to the complexity of the processes, biased scenarios of global change and subjective policy background.
Power Transformer Diagnostics, Monitoring and Design Features
Power transformers are key components in electric power distribution and transmission systems, and it is essential that they function properly for many years. With increasing age, there are potential risks of extremely high monetary losses due to unexpected failures and outages. A simple solution would be to replace all aging and risky transformers at once with new ones. Such an approach is obviously not a fiscally realistic solution. The main objectives are to extend their service life and optimize their performance through increased availability.
Issouf Fofana, Ph.D. ing. Chairholder (Ed.)
Active technological development has fuelled rapid growth in the number of Unmanned Aerial Vehicle (UAV) platforms being deployed around the globe. Novel UAV platforms, UAV-based sensors, robotic sensing and imaging techniques, the development of processing workflows, as well as the capacity of ultra-high temporal and spatial resolution data, provide both opportunities and challenges that will allow engineers and scientists to address novel and important scientific questions in UAV and sensor design, remote sensing and environmental monitoring.T
Felipe Gonzalez Toro (Ed.) --- Antonios Tsourdos (Ed.)
ctive technological development has fuelled rapid growth in the number of Unmanned Aerial Vehicle (UAV) platforms being deployed around the globe. Novel UAV platforms, UAV-based sensors, robotic sensing and imaging techniques, the development of processing workflows, as well as the capacity of ultra-high temporal and spatial resolution data, provide both opportunities and challenges that will allow engineers and scientists to address novel and important scientific questions in UAV and sensor design, remote sensing and environmental monitoring.
Two-Dimensional Electronics - Prospects and Challenges
During the past 10 years, two-dimensional materials have found incredible attention in the scientific community. The first two-dimensional material studied in detail was graphene, and many groups explored its potential for electronic applications. Meanwhile, researchers have extended their work to two-dimensional materials beyond graphene. At present, several hundred of these materials are known and part of them is considered to be useful for electronic applications.
UAV or Drones for Remote Sensing Applications
The rapid development and growth of unmanned aerial vehicles (UAVs) as a remote sensing platform, as well as advances in the miniaturization of instrumentation and data systems, have resulted in an increasing uptake of this technology in the environmental and remote sensing science communities.Although tough regulations across the globe may still limit the broader use of UAVs, their use in precision agriculture, ecology, atmospheric research, disaster response biosecurity, ecological and reef monitoring, forestry, fire monitoring, quick response measurements for emergency disaster, Earth science research, volcanic gas sampling, monitoring of gas pipelines, mining plumes, humanitarian observations and biological/chemo-sensing tasks continues to increase.
Felipe Gonzalez Toro and Antonios Tsourdos (Eds.)
Open-source electronics are becoming very popular, and are integrated with our daily educational and developmental activities. At present, the use open-source electronics for teaching science, technology, engineering, and mathematics (STEM) has become a global trend. Off-the-shelf embedded electronics such as Arduino- and Raspberry-compatible modules have been widely used for various applications, from do-it-yourself (DIY) to industrial projects. In addition to the growth of open-source software platforms, open-source electronics play an important role in narrowing the gap between prototyping and product development. Indeed, the technological and social impacts of open-source electronics in teaching, research, and innovation have been widely recognized.
A topic of utmost importance in civil engineering is finding optimal solutions throughout the life cycle of buildings and infrastructural objects, including their design, manufacturing, use, and maintenance. Operational research, management science, and optimization methods provide a consistent and applicable groundwork for engineering decision-making. These topics have received the interest of researchers and, after a rigorous peer-review process, eight papers have been published in this Special Issue.
Engineering Dielectric Liquid Applications
Dielectric liquids are used as impregnates of solid insulations or filling products in many kinds of equipment, such as transformers (power, rectifier, distribution, traction, furnace, potential, current), resistors, reactors, capacitors, cables, bushings, circuit breakers, tap changers, and thyristor cooling in power electronics, etc. Their role is paramount in the sense that their presence is one of the fundamental conditions for the proper functioning of such equipment. Similar to blood in the human body, dielectric liquids hold the responsibility of maintaining the entire equipment.
Structural Health Monitoring (SHM) of Civil Structures
At the current time of writing, the American Society of Civil Engineers (ASCE) has awarded American infrastructure a grade of D+, meaning poor and at risk. Part of the reason for the low grade is due to the rapid deterioration of structural integrity and the inability of most places to safely meet future demands. Deficiencies in these areas may be remediated by advancements in structural health monitoring (SHM) technologies that provide sensing systems to automatically and economically diagnose structural integrity.
Gangbing Song (Ed.) --- Chuji Wang (Ed.) --- Bo Wang (Ed.)
General and Civil Engineering --- Technology (General)
Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology.
Blaabjerg, Frede --- Dragicevic, Tomislav --- Davari, Pooya
Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation.
Rangeland Systems: Processes, Management and Challenges
This book provides an unprecedented synthesis of the current status of scientific and management knowledge regarding global rangelands and the major challenges that confront them. It has been organized around three major themes. The first summarizes the conceptual advances that have occurred in the rangeland profession. The second addresses the implications of these conceptual advances to management and policy. The third assesses several major challenges confronting global rangelands in the 21st century.
Presenting very high surface-to-volume ratio, relatively simple processability and low cost, graphene and graphene-related materials were soon identified as promising nanofillers for polymer matrixes. Reports have shown notorious property enhancements for graphene-polymer composites (GPC) at very low filler loadings. Uses of GPC in varied fields, such as energy, electronics, catalysis, separation and purification, biomedicine, aerospace, tribology, etc., have been demonstrated and, in some cases, put into industrial practice. However, challenges still exist
Groundwater Contamination and Remediation
This Special Issue of Water brings together 10 studies on groundwater contamination and remediation. Common themes include practical techniques for plume identification and delineation, the central role of subsurface processes, the pervasiveness of non-Fickian transport, and the importance of bacterial communities in the broader context of biogeochemistry.
Timothy D. Scheibe (Ed.) --- David C. Mays (Ed.)
Understanding and Managing Emerald Ash Borer Impacts on Ash Forests
The emerald ash borer (EAB) is rapidly spreading throughout Eastern North America and devastating ecosystems where ash is a component tree. This rapid and sustained loss of ash trees has already resulted in ecological impacts on both terrestrial and aquatic ecosystems and is projected to be even more severe as EAB invades ash dominated wetlands of the western Great Lakes region. We propose a Special Issue that will address current research documenting ecological impacts of EAB in forest ecosystems, as well as management approaches to mitigate those impacts.
Randall K. Kolka (Ed.) --- Anthony D’Amato (Ed.) --- Nam Jin Noh (Ed.) --- Brian J. Palik (Ed.) --- et al.
Advanced Asphalt Materials and Paving Technologies
There has been significant research progress in the area of pavement materials and paving technologies in the past decade. This includes the use of warm mix asphalt technologies, rubber asphalt, bio asphalt, nanomaterial applications, new construction technologies, innovative concrete materials, as well as the application of mechanistic–empirical pavement design. With all these developments, a collection of peer-reviewed articles with the theme of advanced asphalt materials and paving technologies is necessary for industry, researchers, government agencies, and other stakeholders.
Zhanping You (Ed.) --- Qingli Dai (Ed.) --- Feipeng Xiao (Ed.)
Advances in Integrated Energy Systems Design, Control and Optimization
In the face of climate change and resource scarcity, energy supply systems are on the verge of a major transformation, which mainly includes the introduction of new components and their integration into the existing infrastructures, new network configurations and reliable topologies, optimal design and novel operation schemes, and new incentives and business models. This revolution is affecting the current paradigm and demanding that energy systems be integrated into multi-carrier energy hubs. It is highly increasing the interactions between today’s energy systems at various scales and future intelligent energy systems, which are able to incorporate an increasing amount renewable energy sources.
Josep M. Guerrero (Ed.) --- Amjad Anvari-Moghaddam (Ed.)
Technology (General) --- General and Civil Engineering --- Environmental Engineering
The Special Issue on Advances in Water Distribution Networks (WDNs) explores four important topics of research in the framework of WDNs, namely simulation and optimization modelling, topology and partitioning, water quality, and service effectiveness. With regard to the first topic, the following aspects are addressed: pressure-driven formulations, algorithms for the optimal location of control valves to minimize leakage, the benefits of water discharge prediction for the remote real time control of valves, and transients generated by pumps operating as turbines. In the context of the second topic, a topological taxonomy of WDNs is presented, and partitioning methods for the creation of district metered areas are compared.
Aeroacustic and Vibroacoustic Advancement in Aerospace and Automotive Systems
The purpose of this special issue is to highlight the latest advances in vibroacoustics and aeroacoustics applied to aerospace and automotive industries. In proposing this wide topic, we wanted to give scientists and engineers the opportunity to publish their studies of current interest, both in the theoretical and experimental fields of vibration, sound generation, and radiation; and passive and active noise control approaches, which can be of interest for assessing vibroacoustics characteristics of aerospace and automotive vehicles
Roberto Citarella (Ed.) --- Luigi Federico (Ed.)
Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation
This Special Issue is focused on breakthrough developments in the field of biosensors, as well as on the current scientific progress in biomedical signal processing. The papers address innovative solutions in assistance robotics based on bioelectrical signals, including the following: affordable biosensor technology, affordable assistive-robotics devices, new techniques in myoelectric control, and advances in brain–machine interfacing.
Fernando Torres (Ed.) --- Santiago Puente (Ed.) --- Andrés Ubeda (Ed.)
The Delft Sand, Clay and Rock Cutting Model
Sand, clay and rock have to be excavated for a variety of purposes, such as dredging, trenching, mining (including deep sea mining), drilling, tunnel boring and many other applications. Many excavations take place on dry land, but they are also frequently required in completely saturated conditions, and the methods necessary to accomplish them consequently vary widely. This book provides an overview of cutting theories. It begins with a generic model, valid for all types of soil (sand, clay and rock), and continues with the specifics of dry sand, water-saturated sand, clay, atmospheric rock and hyperbaric rock
Sustainable Living with Environmental Risks
We are not free from environmental risks that accompany the development of human societies. Modern economic development has accelerated environmental pollution, caused loss of natural habitats, and modified landscapes. These environmental changes have impacted natural systems: water and heat circulation, nutrient cycling, and biodiversity. These changes in natural systems degrade ecosystem services and subsequently increase environmental risks for humans. Environmental risks, therefore, are not only human health risks by pollution, climatic anomalies and natural disasters, but also degradation of ecosystem services on which most people are relying for their lives.
Nobuhiro Kaneko --- Shinji Yoshiura --- Masanori Kobayashi
Design and Applications of Coordinate Measuring Machines
Coordinate measuring machines (CMMs) have been conventionally used in industry for 3-dimensional and form-error measurements of macro parts for many years. Ever since the first CMM, developed by Ferranti Co. in the late 1950s, they have been regarded as versatile measuring equipment, yet many CMMs on the market still have inherent systematic errors due to the violation of the Abbe Principle in its design. Current CMMs are only suitable for part tolerance above 10 μm. With the rapid advent of ultraprecision technology, multi-axis machining, and micro/nanotechnology over the past twenty years, new types of ultraprecision and micro/nao-CMMs are urgently needed in all aspects of society
Development and Application of Optical Coherence Tomography (Oct)
This special feature issue has been initiated to celebrate the 25th anniversary of Optical Coherence Tomography (OCT). In OCT, broad bandwidth light is used in order to produce cross sectional images of turbid and translucent samples with high axial resolution (in the order of a few µm). The imaging speed of OCT can be as high as several millions of depth scans (A-scans) per second which allows for various applications in different fields. This special feature issue consists of three overview papers covering OCT angiography, polarization-sensitive OCT and dental applications of OCT. Additional applications and the latest developments in OCT are covered in nine research papers.
Development and Application of Nonlinear Dissipative Device in Structural Vibration Control
This book entitled Development and Application of Nonlinear Dissipative Device in Structural Vibration Control contains contributions that focus on the development and application of innovative nonlinear dissipative systems that mitigate the potentially catastrophic effects of extreme loading by incorporating new materials or effective mechanical control technologies. Moreover, new nonlinear analytical methods for distinctive vibrating structures under different excitations are also highlighted in this book.
Zheng Lu (Ed.) --- Tony Yang (Ed.) --- Ying Zhou (Ed.) --- Angeliki Papalou (Ed.)
Advances in Welding Metal Alloys, Dissimilar Metals and Additively Manufactured Parts
General and Civil Engineering --- Materials --- Mining and Metallurgy
Welding technology has been taken for granted as a mature and established technology for too long. However, many new welding technologies have been included among the alternatives to joining materials. They come both from the areas of fusion and solid-state welding. Moreover, a recent approach has offered one more alternative. This is hybrid welding, which couples two or more welding sources in a cooperative or synergic welding mode.
Aluminium is the world’s most abundant metal and is the third most common element, comprising 8% of the Earth’s crust. The versatility of aluminium makes it the most widely used metal after steel. By utilising various combinations of their advantageous properties such as strength, lightness, corrosion resistance, recyclability, and formability, aluminium alloys are being employed in an ever-increasing number of applications. In the recent decade, a rapid new development has been made in production of aluminium alloys, and new techniques of casting, forming, welding, and surface modification, have been evolved to improve the structural integrity of aluminium alloys.
First-Principles Approaches to Metals, Alloys, and Metallic Compounds
Mining and Metallurgy --- Chemistry (General)
Current fundamental electronic-structure theory allows for the accurate prediction and characterization of elemental metals adopting any allotropic structure, intermetallic compounds, and other metal-rich phases. From an engineering perspective, there is a need for structural materials that are suitable for mechanical and civil engineering as well as energy production and conversion. While different microstructural features influence the macroscopic behaviour, quantum-mechanical simulation may enormously accelerate and guide the entire development process since atomistic modelling allows for the generation of structural models and the calculation of enthalpies and other free energies as a function of pressure and temperature
Hydrometallurgy, which involves the use of aqueous solutions for the recovery of metals from ores, concentrates, and recycled or residual material, plays an integral role in the multi-billion dollar minerals processing industry. There are numerous hydrometallurgical process technologies used for recovering metals, such as: agglomeration; leaching; solvent extraction/ion exchange; metal recovery; and remediation of tailings/waste. Modern hydrometallurgical routes to extract metals from their ores are faced with a number of issues related to both the chemistry and engineering aspects of the processes involved.
Suresh Bhargava --- Mark Pownceby --- Rahul Ram
Neutron and Synchrotron radiation methods have matured to become powerful techniques for the study of a vast range of materials, including metals. The characterization methods comprise the categories of diffraction, spectroscopy and imaging, which themselves can alter greatly in detail, to include hundreds of variants, problems and sample environments. In a similar way, their applications to metals and hard condensed matter materials cover disciplines spanning engineering, physics, chemistry, materials science and their derivatives such as geology, energy storage, etc
Shape memory alloys (SMAs) have special property of the shape memory effect. After thermal treatment above the martensitic transition temperature, the alloys come back to the original shape when the alloys heat again after having cooled it to the temperature that is lower than the martensitic transition temperature. By means of this property, many industrial parts and systems were produced. This Special Issue "Shape Memory Alloys 2017" is constructed articles reporting new and progressive research results, as well as reviews of particular classes of fundamental physics of the materials and their applications of SMAs.
Counteracting Urban Heat Island Effects in a Global Climate Change Scenario
Urban heat islands are a new type of microclimatic phenomenon that causes a significant increase in the temperature of cities compared to surrounding areas. The phenomenon has been enforced by the current trend towards climate change. Although experts consider urban heat islands an urgent European Union public health concern, there are too few policies that address it. The EU carried out a project to learn more about this phenomenon through pilot initiatives. The pilots included feasibility studies and strategies for appropriately altering planning rules and governance to tackle the problem of urban heat islands.
General and Civil Engineering --- Materials -
Designing Sustainable Energy for All: Sustainable Product-Service System Design Applied to Distributed Renewable Energy
This open access book addresses the issue of diffusing sustainable energy access in low- and middle-income contexts. Access to energy is one of the greatest challenges for many people living in low-income and developing contexts, as around 1.4 billion people lack access to electricity. Distributed Renewable Energy systems (DRE) are considered a promising approach to address this challenge and provide energy access to all. However, even if promising, the implementation of DRE systems is not always straightforward. The book analyses, discusses and classifies the promising
Carlo Vezzoli --- Fabrizio Ceschin --- Lilac Osanjo --- Mugendi K. M’Rithaa --- et al.
Designing Sustainable Technologies, Products and Policies
This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment.
Enrico Benetto --- Kilian Gericke --- Mélanie Guiton
Autonomous Driving: Technical, Legal and Social Aspects
This book takes a look at fully automated, autonomous vehicles and discusses many open questions: How can autonomous vehicles be integrated into the current transportation system with diverse users and human drivers? Where do automated vehicles fall under current legal frameworks? What risks are associated with automation and how will society respond to these risks? How will the marketplace react to automated vehicles and what changes may be necessary for companies? Experts from Germany and the United States define key societal, engineering, and mobility issues related to the automation of vehicles.
Markus Maurer --- J. Christian Gerdes --- Barbara Lenz --- Hermann Winner
Freshwater Microplastics: Emerging Environmental Contaminants?
This volume focuses on microscopic plastic debris, also referred to as microplastics, which have been detected in aquatic environments around the globe and have accordingly raised serious concerns. The book explores whether microplastics represent emerging contaminants in freshwater systems, an area that remains underrepresented to date. Given the complexity of the issue, the book covers the current state-of-research on microplastics in rivers and lakes, including analytical aspects, environmental concentrations and sources, modelling approaches, interactions with biota, and ecological implications.
Ship and Offshore Structure Design in Climate Change Perspective
This book summarizes results of longstanding research and scientific contributions from many projects and relevant working groups. It collects and evaluates wind and wave climate projections under changing climate having design needs and marine safety in focus. Potential impact of projected climate change in met-ocean conditions on ships and offshore structures is discussed and illustrated by an example of the expected wave climate change on tanker design.
Elzbieta Maria Bitner-Gregersen --- Lars Ingolf Eide --- Torfinn Hørte --- Rolf Skjong
We are not free from environmental risks that accompany the development of human societies. Modern economic development has accelerated environmental pollution, caused loss of natural habitats, and modified landscapes. These environmental changes have impacted natural systems: water and heat circulation, nutrient cycling, and biodiversity. These changes in natural systems degrade ecosystem services and subsequently increase environmental risks for humans.
Light and light based technologies have played an important role in transforming our lives via scientific contributions spanned over thousands of years. In this book we present a vast collection of articles on various aspects of light and its applications in the contemporary world at a popular or semi-popular level. These articles are written by the world authorities in their respective fields. This is therefore a rare volume where the world experts have come together to present the developments in this most important field of science in an almost pedagogical manner. This volume covers five aspects related to light.
Mohammad D. Al-Amri --- Mohamed El-Gomati --- M. Suhail Zubairy
Managing the Complexity of Critical Infrastructures: A Modelling and Simulation Approach
This book summarizes work being pursued in the context of the CIPRNet (Critical Infrastructure Preparedness and Resilience Research Network) research project, co-funded by the European Union under the Seventh Framework Programme (FP7). The project is intended to provide concrete and on-going support to the Critical Infrastructure Protection (CIP) research communities, enhancing their preparedness for CI-related emergencies, while also providing expertise and technologies for other stakeholders to promote their understanding and mitigation of the consequences of CI disruptions, leading to enhanced resilience.
Roberto Setola --- Vittorio Rosato --- Elias Kyriakides --- Erich Rome
Governance for Drought Resilience: Land and Water Drought Management in Europe
This book presents the findings of a team of scientists and practitioners who have been working on the project “Benefits of Governance in Drought Adaptation” (in short: the DROP project), which is included in the European Union’s INTERREG IVB NWE programme. The DROP governance team developed a Governance Assessment Tool (GAT), which allows the governance setting of a given region for planning and realizing drought adaptation measures to be assessed
Hans Bressers --- Nanny Bressers --- Corinne Larrue
High Mountain Conservation in a Changing World
This book aims to provide case studies and a general view of the main processes involved in the ecosystem shifts occurring in the high mountains, and to analyse the implications for nature conservation. Although case studies from the Pyrenees are preponderant, conclusions are aimed at any mountain range surrounded by highly populated lowland areas. The chapters give emphasis to approaches from environmental geography, functional ecology, biogeography, and paleoenvironmental reconstructions.
Jordi Catalan --- Josep M Ninot --- M. Mercè Aniz
Evolution, Monitoring and Predicting Models of Rockburst: Precursor Information for Rock Failure
This open access book focuses on investigating predicting precursor information and key points of rockburst in mining engineering through laboratory experiment, theoretical analysis, numerical simulation and case studies. Understanding the evolution patterns for the microstructure instability of rock is a prerequisite for rockburst prediction. The book provides a guide for readers seeking to understand the evolution patterns for the microstrucure of rock failure, the predicting key point of rock failure and the rockburst predicting model.
The aim of this book is to document for the first time the dimensions and requirements of effective integrated groundwater management (IGM). Groundwater management is a formidable challenge, one that remains one of humanity’s foremost priorities. It has become a largely non-renewable resource that is overexploited in many parts of the world. In the 21st century, the issue moves from how to simply obtain the water we need to how we manage it sustainably for future generations, future economies, and future ecosystems. The focus then becomes one of understanding the drivers and current state of the groundwater resource, and restoring equilibrium to at-risk aquifers.
Anthony J. Jakeman --- Olivier Barreteau --- Randall J. Hunt --- Jean-Daniel Rinaudo --- et al.
Nature-Based Solutions to Climate Change Adaptation in Urban Areas: Linkages between Science, Policy and Practice
This book brings together research findings and experiences from science, policy and practice to highlight and debate the importance of nature-based solutions to climate change adaptation in urban areas. Emphasis is given to the potential of nature-based approaches to create multiple-benefits for society. The expert contributions present recommendations for creating synergies between ongoing policy processes, scientific programmes and practical implementation of climate change and nature conservation measures in global urban areas.
Nadja Kabisch --- Horst Korn --- Jutta Stadler --- Aletta Bonn
This book collects 4 keynote and 15 theme lectures presented at the 2nd European Conference on Earthquake Engineering and Seismology (2ECEES), held in Istanbul, Turkey, from August 24 to 29, 2014. The conference was organized by the Turkish Earthquake Foundation - Earthquake Engineering Committee and Prime Ministry, Disaster and Emergency Management Presidency under the auspices of the European Association for Earthquake Engineering (EAEE) and European Seismological Commission (ESC).
Plant Selection for Bioretention Systems and Stormwater Treatment Practices
As cities develop, more land is converted into impervious surfaces, which do not allow water to infiltrate. Careful urban planning is needed to ensure that the hydrologic cycle and water quality of the catchment areas are not affected. There are techniques that can attenuate peak flow during rain events and reduce the amount of metals, nutrients, and bacteria that enter the urban water cycle.
William F. Hunt --- Bill Lord --- Benjamin Loh --- Angelia Sia
Ecological Risk Assessment for Chlorpyrifos in Terrestrial and Aquatic Systems in North America
This book attempts to provide concise, critical reviews of timely advances, philosophy and significant areas of accomplished or needed endeavor in the total field of xenobiotics, in any segment of the environment, as well as toxicological implications.
MARE-WINT: New Materials and Reliability in Offshore Wind Turbine Technology
This book provides a holistic, interdisciplinary overview of offshore wind energy, and is a must-read for advanced researchers. Topics, from the design and analysis of future turbines, to the decommissioning of wind farms, are covered. The scope of the work ranges from analytical, numerical and experimental advancements in structural and fluid mechanics, to novel developments in risk, safety & reliability engineering for offshore wind.The core objective of the current work is to make offshore wind energy more competitive, by improving the reliability, and operations and maintenance (O&M) strategies of wind turbines.
Wiesław Ostachowicz --- Malcolm McGugan --- Jens-Uwe Schröder-Hinrichs --- Marcin Luczak
Satellite Earth Observations and Their Impact on Society and Policy
he result of a workshop bringing together an international advisory board of experts in science, satellite technologies, industry innovations, and public policy, this book addresses the current and future roles of satellite Earth observations in solving large-scale environmental problems. The book showcases the results of engaging distinct communities to enhance our ability to identify emerging problems and to administer international regimes created to solve them. It also reviews the work of the Policy and Earth Observation Innovation Cycle (PEOIC) project, an effort aimed at assessing the impact of satellite observations on environmental policy and to propose a mission going forward that would launch an “innovation cycle”.
This book compares the lessons learned from a wetland-perspective approach to the changing climate and the requirements of the Water Framework Directive (WFD) with regard to environmental conservation. Examples from Germany and Poland are discussed due to the efficiency of their respective implementations of water conservation policies
Acoustic and Elastic Waves: Recent Trends in Science and Engineering
The present Special Issue intends to explore new directions in the field of acoustics and ultrasonics. The interest includes, but is not limited to, the use of acoustic technology for condition monitoring of materials and structures. Topics of interest (among others): • Acoustic emission in materials and structures (without material limitation)
Dimitrios G. Aggelis (Ed.) --- Nathalie Godin (Ed.)
Additive Manufacturing Technologies and Applications
The present Special Issue proposes articles in the area of Additive Manufacturing with particular attention to the different employed technologies and the several possible applications. The main investigated technologies are the Selective Laser Sintering (SLS) and the Fused Deposition Modelling (FDM). These methodologies, combined with the Computer Aided Design (CAD), provide important advantages. Numerical, analytical and experimental knowledge and models are proposed to exploit the potential advantages given by 3D printing for the production of modern systems and structures in aerospace, mechanical, civil and biomedical engineering fields.
Salvatore Brischetto (Ed.) --- Paolo Maggiore (Ed.) --- Carlo Giovanni Ferro (Ed.)
Advanced DSP Techniques for High-Capacity and Energy-Efficient Optical Fiber Communications
The rapid proliferation of the Internet has been driving communication networks closer and closer to their limits, while available bandwidth is disappearing due to an ever-increasing network load. Over the past decade, optical fiber communication technology has increased per fiber data rate from 10 Tb/s to exceeding 10 Pb/s. The major explosion came after the maturity of coherent detection and advanced digital signal processing (DSP).
Advanced Hydroinformatic Techniques for the Simulation and Analysis of Water Supply and Distribution Systems
The overall objective of this Special Issue is to improve knowledge on developing and using advanced simulation tools in water supply and distribution systems. The final aim is to propose a suitable framework supporting insightful hydraulic mechanisms to help the decision-making processes of water utility managers and practitioners. Contributions to this Special Issue, exploring new research avenues on urban hydraulics and hydroinformatics, will be of great value for both Academia and those water utility stakeholders.
Manuel Herrera (Ed.) --- Silvia Meniconi (Ed.) --- Stefano Alvisi (Ed.) --- Joaquín Izquierdo (Ed.)
The book presents research papers addressing a wide range of environmental topics: water and wastewater treatment and management, soil degradation and conservation, sediment pollution control, environmental impacts of technologies, life cycle analysis (LCA), air quality and indoor environment, and advanced environmental materials. The contributions provide novel and significant scientific results and advanced applications in the field of environmental engineering and provide an integrated view of the trends in solving the problems associated with the achievement of sustainability.
Adriana Estokova (Ed.) --- Magdalena Balintova (Ed.)
Advances in Groundwater Flow and Solute Transport: Pushing the Hidden Boundary
In recent decades, the study of groundwater flow and solute transport has advanced into new territories that are beyond conventional theories, such as Darcy’s law and Fick’s law. The studied media have changed from permeable porous and fractured ones to much less permeable ones, such as clay and shale. The studied pore sizes have also changed from millimetres to micro-meters or even nano-meters.
Zhan, Hongbin --- Wang, Quanrong --- Wen, Zhang
Advances in Multi-Sensor Information Fusion: Theory and Applications 2017
The information fusion technique can integrate a large amount of data and knowledge representing the same real-world object and obtain a consistent, accurate and useful representation of that object. The data may be independent or redundant, and can be obtained by different sensors at the same time or at different times. A suitable combination of investigative methods can substantially increase the profit of information in comparison with that from a single sensor. Multi-sensor information fusion has been a key issue in sensor research since the 1970s and it has been applied in many fields, such as geospatial information systems, business intelligence, oceanography, discovery science, intelligent transport systems, wireless sensor networks, etc.
Xue-Bo Jin (Ed.) --- Shuli Sun (Ed.) --- Hong Wei (Ed.) --- Feng-Bao Yang (Ed.)
Application of Artificial Neural Networks in Geoinformatics
Recently, a need has arisen for prediction techniques that can address a variety of problems by combining methods from the rapidly developing field of machine learning with geoinformation technologies such as GIS, remote sensing, and GPS. As a result, over the last few decades, one particular machine learning technology, known as artificial neural networks, has been successfully applied to a wide range of fields in science and engineering. In addition, the development of computational and spatial technologies has led to the rapid growth of geoinformatics, which specializes in the analysis of spatial information.
Applications of Computational Intelligence to Power Systems
Electric power systems around the world are changing in terms of structure, operation, management and ownership due to technical, financial, and ideological reasons. Power systems keep on expanding in terms of geographical areas, asset additions, and the penetration of new technologies in generation, transmission, and distribution. The conventional methods for solving the power system design, planning, operation, and control problems have been extensively used for different applications, but these methods suffer from several difficulties, thus providing suboptimal solutions.
Applications of Remote Sensing/ GIS in Water Resources and Flooding Risk Managements
Remote sensing and GIS play critical roles in water resource and flood inundation mapping and risk management. Remote sensing provides data sources for mapping water resources (snow and glaciers, water bodies, soil moisture and groundwater), measuring hydrological fluxes (ET, precipitation and river discharge), and monitoring drought and flooding inundation, while GIS provides the best tools for water resources, drought and flooding risk management and for setting up hydrologic models, inputting data processing and output analyses and visualizations
Hongjie Xie (Ed.) --- Xianwei Wang /Ed.)
Applications of Semiconductor Optical Amplifiers
ca. 200 words; this text will present the book in all promotional forms (e.g. flyers). Please describe the book in straightforward and consumer-friendly terms. [Semiconductor optical amplifiers (SOAs) are considered a key enabling technology for the design and implementation of photonic circuits, subsystems, and networks. Owing to the attractive features of low power consumption, compactness, broad gain bandwidth and ability for integration with affordable cost, SOAs enjoy continuous popularity as core versatile devices within the optical communications research and industrial sector for the accomplishment of critical and indispensable tasks at fundamental and system-oriented level.
Biomass for Energy Country Specific Show Case Studies
In many domestic and industrial processes, vast percentages of primary energy are produced by the combustion of fossil fuels. Apart from diminishing the source of fossil fuels and the increasing risk of higher costs and energy security, the impact on the environment is worsening continually. Renewables are becoming very popular, but are, at present, more expensive than fossil fuels, especially photovoltaics and hydropower. Biomass is one of the most established and common sources of fuel known to mankind, and has been in continuous use for domestic heating and cooking over the years, especially in poorer communities.
Clean Energy and Fuel (Hydrogen) Storage
Clean energy and fuel storage are often required for both stationary and automotive applications. Some of these clean energy and fuel storage technologies currently under extensive research and development include hydrogen storage, direct electric storage, mechanical energy storage, solar–thermal energy storage, electrochemical (batteries and supercapacitors), and thermochemical storage. The gravimetric and volumetric storage capacity, energy storage density, power output, operating temperature and pressure, cycle life, recyclability, and cost of clean energy or fuel storage are some of the factors that govern efficient energy and fuel storage technologies for potential deployment in energy harvesting (solar and wind farms) stations and onboard vehicular transportation
Climate Change Mitigation and Adaptation—ZEMCH 2016
This book explores the current issues around sustainable design and energy efficiency within the construction industry in both developed and developing countries. Sustainable housing; thermal comfort; daylighting; low-income housing; green roofs; energy efficient retrofitting and photovoltaic façades are some of the subjects discussed in the book.
Climate Variability and Climate Change Impacts on Land Surface, Hydrological Processes and Water Management
During the last several decades, Earth´s climate has undergone significant changes due to anthropogenic global warming, and feedbacks to the water cycle. Therefore, persistent efforts are required to improve our understanding of hydrological processes and to engage in efficient water management strategies that explicitly consider changing environmental conditions. The twenty-four contributions in this book have broadly addressed topics across
Zhang, Yongqiang --- Li, Hongxia --- Reggiani, Paolo
Computational Methods of Multi-Physics Problems
This book offers a collection of six papers addressing problems associated with the computational modeling of multi-field problems. Some of the proposed contributions present novel computational techniques, while other topics focus on applying state-of-the-art techniques in order to solve coupled problems in various areas including the prediction of material failure during the lithiation process, which is of major importance in batteries; efficient models for flexoelectricity, which require higher-order continuity; the prediction of composite pipes under thermomechanical conditions; material failure in rock; and computational materials design.
Control and Nonlinear Dynamics on Energy Conversion Systems
The ever-increasing need for higher efficiency, smaller size, and lower cost make the analysis, understanding, and design of energy conversion systems extremely important, interesting, and even imperative. One of the most neglected features in the study of such systems is the effect of the inherent nonlinearities on the stability of the system. Due to these nonlinearities, these devices may exhibit undesirable and complex dynamics, which are the focus of many researchers. Even though a lot of research has taken place in this area during the last 20 years, it is still an active research topic for mainstream power engineers.
Iu, Herbert Ho-Ching --- El Aroudi, Abdelali
Coordinate measuring machines (CMMs) have been conventionally used in industry for 3-dimensional and form-error measurements of macro parts for many years. Ever since the first CMM, developed by Ferranti Co. in the late 1950s, they have been regarded as versatile measuring equipment, yet many CMMs on the market still have inherent systematic errors due to the violation of the Abbe Principle in its design. Current CMMs are only suitable for part tolerance above 10 μm. With the rapid advent of ultraprecision technology, multi-axis machining, and micro/nanotechnology over the past twenty years, new types of ultraprecision and micro/nao-CMMs are urgently needed in all aspects of society.
The formation of patterns in subaqueous sediment
This book investigates the formation of subaqueous patterns by means of high-fidelity numerical simulations which resolve all the relevant scales of the flow and the sediment bed. This is required to provide a space- and time-resolved information on the flow field and the sediment bed. Secondly, detailed analysis of the generated data allows to address the different governing mechanisms involved in the formation of patterns as well as to access the validity of various existing models.
Geothermal Energy: Delivering on the Global Potential
After decades of being largely the preserve of countries in volcanic regions, the use of geothermal energy—for both heat and power applications—is now expanding worldwide. This reflects its excellent low-carbon credentials and its ability to offer baseload and dispatchable output - rare amongst the mainstream renewables. Yet uptake of geothermal still lags behind that of solar and wind, principally because of (i) uncertainties over resource availability in poorly-explored reservoirs and (ii) the concentration of full-lifetime costs into early-stage capital expenditure (capex).
Abstract Microtechnology has changed our world since the last century, when silicon microelectronics revolutionized sensor, control and communication areas, with applications extending from domotics to automotive, and from security to biomedicine. The present century, however, is also seeing an accelerating pace of innovation in glassy materials; as an example, glass-ceramics, which successfully combine the properties of an amorphous matrix with those of micro- or nano-crystals, offer a very high flexibility of design to chemists, physicists and engineers, who can conceive and implement advanced microdevices.
Righini, Giancarlo --- Righini, Nicoletta
Global Indigeneities and the Environment
Global Indigeneities and the Environment—covering fields from American Indian Studies, anthropology, communications, ethnoecology, ethnomusicology, geography, global studies, history, and literature, the purpose of the Special Issue is to give new understandings of the concept of global indigeneities and to showcase some of the most promising work in the field to date.
Karen L. Thornber (Ed.) --- Tom Havens (Ed.)
Heat and Mass Transfer in Building Energy Performance Assessment
The building industry is influenced by many factors and trends reflecting the current situation and developments in social, economic, technical, and scientific fields. One of the most important trends seeks to minimize the energy demand. This can be achieved by promoting the construction of buildings with better thermal insulating capabilities of their envelopes and better efficiency in heating, ventilation, and air conditioning systems.
Robert Černý Sciprofile link ,Ákos Lakatos Sciprofile link andVáclav Kočí Sciprofile link (Eds.)
Heat Transfer Processes in Oscillatory Flow Conditions
Heat exchange processes in steady flows have been studied extensively over the last two hundred years, and are now a part of undergraduate syllabi in most engineering courses. However, heat transfer processes in oscillatory flow conditions are still not very well understood. Their importance is well recognized in applications including Stirling machines, thermoacoustic engines, and refrigerators or pulsed-tube coolers in cryogenics.
Watershed hydrology is driven by climate forcing, near ground surface characteristics, and human activities, addressing a wide spectrum of environmental and water resource problems regarding both scientific-driven questions and practical engineering issues. This book collates watershed problems and solutions from around the world covering diverse climate types. These cases show complex interactions between hydrological processes and environmental conditions and scientific methods for understanding the hydrological regime and management of human activities.
Christopher J. Duffy (Ed.) --- Xuan Yu (Ed.)
World Green Building Council suggests that health, well-being and productivity should be the next chapter for green building. There is an obvious shift of green building movement from technology-centric towards human-centric, which culminates in recent WELL Building Standard, focusing exclusively on human health and wellness. This special issue aims to push forward the research, discourse and practice of green building towards more human-oriented design solutions.
Humidity Sensors. Advances in Reliability, Calibration and Application
Humidity detection has deep significance for the scientific research surrounding medical care and human performance, and the industrial development of agriculture, geography and automated instruments. This special issue aims to showcase some of the advancements in humidity sensor design and calibration, and its applications. The selected papers cover a variety of humidity sensor-related topics including material science, chemistry and industrial engineering.
McCarthy, Peter W. --- Liu, Zhuofu --- Cascioli, Vincenzo
Innovative Technologies and Services for Smart Cities
A smart city is a modern technology-driven urban area which uses sensing devices, information, and communication technology connected to the internet of things (IoTs) for the optimum and efficient utilization of infrastructures and services with the goal of improving the living conditions of citizens. Increasing populations, lower budgets, limited resources, and compatibility of the upgraded technologies are some of the few problems affecting the implementation of smart cities. Hence, there is continuous advancement regarding technologies for the implementation of smart cities.
Interface Circuits for Microsensor Integrated Systems
this text will present the book in all promotional forms (e.g. flyers). Please describe the book in straightforward and consumer-friendly terms. [Recent advances in sensing technologies, especially those for Microsensor Integrated Systems, have led to several new commercial applications. Among these, low voltage and low power circuit architectures have gained growing attention, being suitable for portable long battery life devices. The aim is to improve the performances of actual interface circuits and systems, both in terms of voltage mode and current mode, in order to overcome the potential problems due to technology scaling and different technology integrations.
Giuseppe Ferri (Ed.) --- Vincenzo Stornelli (Ed.)
Kernel Methods and Hybrid Evolutionary Algorithms in Energy Forecasting
The development of kernel methods and hybrid evolutionary algorithms (HEAs) to support experts in energy forecasting is of great importance to improving the accuracy of the actions derived from an energy decision maker, and it is crucial that they are theoretically sound. In addition, more accurate or more precise energy demand forecasts are required when decisions are made in a competitive environment. Therefore, this is of special relevance in the Big Data era. These forecasts are usually based on a complex function combination. These models have resulted in over-reliance on the use of informal judgment and higher expense if lacking the ability to catch the data patterns.
Landscape Urbanism and Green Infrastructure
This volume examines the applicability of landscape urbanism theory in contemporary landscape architecture practice by bringing together ecology and architecture in the built environment. Using participatory planning of green infrastructure and application of nature-based solutions to address urban challenges, landscape urbanism seeks to reintroduce critical connections between natural and urban systems. In light of ongoing developments in landscape architecture, the goal is a paradigm shift towards a landscape that restores and rehabilitates urban ecosystems.
Life Cycle Assessment on Green Building Implementation
Greenhouse-gas emissions have become one of the most impacting environmental issues in today’s society. A rapidly increasing trend in global CO2emissions particularly since the early nineties (23.64% since 1990) has led to the generation of about 50,000 million tons of CO2–equivalent (eqv) worldwide in 2010. According to mainstream climate experts, the increasing concentration of greenhouse-gases is having a warming effect on the world climate. To slow down global warming, there is a global focus on reducing greenhouse-gas emissions
Liquid Crystal on Silicon Devices: Modeling and Advanced Spatial Light Modulation Applications
Liquid Crystal on Silicon (LCoS) has become one of the most widespread technologies for spatial light modulation in optics and photonics applications. These reflective microdisplays are composed of a high-performance silicon complementary metal oxide semiconductor (CMOS) backplane, which controls the light-modulating properties of the liquid crystal layer. State-of-the-art LCoS microdisplays may exhibit a very small pixel pitch (below 4 ?m), a very large number of pixels (resolutions larger than 4K), and high fill factors (larger than 90%). They modulate illumination sources covering the UV, visible, and far IR. LCoS are used not only as displays but also as polarization, amplitude, and phase-only spatial light modulators, where they achieve full phase modulation.
Machine Learning and Embedded Computing in Advanced Driver Assistance Systems (ADAS)
This book contains the latest research on machine learning and embedded computing in advanced driver assistance systems (ADAS). It encompasses research in detection, tracking, LiDAR
Machine Learning Techniques Applied to Geoscience Information System and Remote Sensing
As computer and space technologies have been developed, geoscience information systems (GIS) and remote sensing (RS) technologies, which deal with the geospatial information, have been rapidly maturing. Moreover, over the last few decades, machine learning techniques including artificial neural network (ANN), deep learning, decision tree, and support vector machine (SVM) have been successfully applied to geospatial science and engineering research fields. The machine learning techniques have been widely applied to GIS and RS research fields and have recently produced valuable results in the areas of geoscience, environment, natural hazards, and natural resources.
Planning the Charging Infrastructure for Electric Vehicles in Cities and Regions
Planning the charging infrastructure for electric vehicles (EVs) is a new challenging task. This book treats all involved aspects: charging technologies and norms, interactions with the electricity system, electrical installation, demand for charging infrastructure, economics of public infrastructure provision, policies in Germany and the EU, external effects, stakeholder cooperation, spatial planning on the regional and street level, operation and maintenance, and long term spatial planning.
Timber Engineering - Principles for Design
This comprehensive book provides in-depth knowledge and understanding of design rules according to Eurocode 5. It is based on the first edition of the STEP (Structural Timber Education Programme) series, which was prepared in 1995 by about 50 authors from 14 European countries. The present work updates and extends the STEP compilation and is aimed at students, structural engineers and other timber structure professionals.
Turbulent open channel flow, sediment erosion and sediment transport
This thesis aims to contribute to a better understanding of turbulent open channel flow, sediment erosion and sediment transport. The thesis provides an analysis of high-fidelity data from direct numerical simulation of (i) open channel flow over an array of fixed spheres, (ii) open channel flow with mobile eroding spheres, (iii) open channel flow with sediment transport of many mobile spheres. An immersed boundary method is used to resolve the finite-size particles.
Methods and Concepts for Designing and Validating Smart Grid Systems
Energy efficiency and low-carbon technologies are key contributors to curtailing the emission of greenhouse gases that continue to cause global warming. The efforts to reduce greenhouse gas emissions also strongly affect electrical power systems. Renewable sources, storage systems, and flexible loads provide new system controls, but power system operators and utilities have to deal with their fluctuating nature, limited storage capabilities, and typically higher infrastructure complexity with a growing number of heterogeneous components.
Strasser, Thomas --- Rohjans, Sebastian --- Burt, Graeme
Mineralogy of Quartz and Silica Minerals
The present book reports recent contributions from research in the field of quartz and other silica minerals. The various forms of silica (SiO2) represent important constituents of the Earth crust and play a central role in the composition of geological materials. In particular, quartz is widely used as a raw material in numerous industrial sectors. The knowledge of the formation and specific properties of SiO2 rocks and minerals is indispensable for the understanding and reconstruction of geological processes, as well as for specific technical applications.
Modeling and Practice of Erosion and Sediment Transport under Change
Climate and anthropogenic changes impact the conditions of erosion and sediment transport in rivers. Rainfall variability and, in many places, the increase of rainfall intensity have a direct impact on rainfall erosivity. Increasing changes in demography have led to the acceleration of land cover changes in natural areas, as well as in cultivated areas, and, sometimes, in degraded areas and desertified landscapes. These anthropogenized landscapes are more sensitive to erosion. On the other hand, the increase in the number of dams in watersheds traps a great portion of sediment fluxes, which do not reach the sea in the same amount, nor at the same quality, with consequences on coastal geomorphodynamics.
Mahé, Gil --- Aksoy, Hafzullah --- Meddi, Mohamed
Molecular Magnetism of Lanthanides Complexes and Networks
Over the last ten years a fresh air has been blowing in the field of molecular magnetism with the re-introduction of lanthanides ions as spin carriers in magnetic molecules. The strong magnetic moment and huge magnetic anisotropy of lanthanide ions has enabled significant breakthroughs in magnetic blocking temperature and related phenomena. The chemical versatility of these ions is also a strong asset as easy substitution among the lanthanides series enables isotropic, anisotropic or solid-solutions of magnetic molecules. Additionally, their outstanding luminescent properties are key features in rationalizing the single-molecule magnet (SMM) behavior and paving the way toward production of multifunctional materials.
Nanoelectronic Materials, Devices and Modeling
As CMOS scaling is approaching the fundamental physical limits, a wide range of new nanoelectronic materials and devices have been proposed and explored to extend and/or replace the current electronic devices and circuits so as to maintain progress with respect to speed and integration density. The major limitations, including low carrier mobility, degraded subthreshold slope, and heat dissipation, have become more challenging to address as the size of silicon-based metal oxide semiconductor field effect transistors (MOSFETs) has decreased to nanometers, while device integration density has increased.
Noise and Vibration Control in the Built Environment
With global urbanization rapidly rising and the increasing need of high-quality built environments, the requirement of achieving improved sound quality, both for outdoor and indoor environments, has received a lot of attention. This Special Issue collection reflects the current state of the art, with 12 papers covering environmental acoustics; the influence of soundscapes on people’s behavior; soundscape pleasantness estimation; tranquility; perceived quality of sonic environments; sound and vibration-related health complaints concerning tramways; and the disturbance of construction machines; as well as in building and room acoustics, including natural ventilation-enabling façade noise control devices; the effect of external shading devices; rating method of airborne sound insulation; water supply and drainage noise, and the effect of diffusive surfaces in auditoria.
Non-destructive Testing of Materials in Civil Engineering
This book was proposed and organized as a means to present recent developments in the field of nondestructive testing of materials in civil engineering. For this reason, the articles highlighted in this editorial relate to different aspects of nondestructive testing of different materials in civil engineering—from building materials to building structures. The current trend in the development of nondestructive testing of materials in civil engineering is mainly concerned with the detection of flaws and defects in concrete elements and structures, and acoustic methods predominate in this field.
Novel Advances in Aquatic Vegetation Monitoring in Ocean, Lakes and Rivers
In recent decades, there has been an increase in the development of strategies for water ecosystem mapping and monitoring. Overall, this is primarily due to legislative efforts to improve the quality of water bodies and oceans. Remote sensing has played a key role in the development of such approaches—from the use of drones for vegetation mapping to autonomous vessels for water quality monitoring. Within the specific context of vegetation characterization, the wide range of available observations—from satellite imagery to high-resolution drone aerial imagery—has enabled the development of monitoring and mapping strategies at multiple scales (e.g., micro- and mesoscales).
Novel Insights into Orbital Angular Momentum Beams: From Fundamentals, Devices to Applications
It is well-known by now that the angular momentum carried by elementary particles can be categorized as spin angular momentum (SAM) and orbital angular momentum (OAM). In the early 1900s, Poynting recognized that a particle, such as a photon, can carry SAM, which has only two possible states, i.e., clockwise and anticlockwise circular polarization states. However, only fairly recently, in 1992, Allen et al. discovered that photons with helical phase fronts can carry OAM, which has infinite orthogonal states.
Yue, Yang --- Huang, Hao --- Ren, Yongxiong --- Pan, Zhongqi --- et al.
Physical Metallurgy of High Manganese Steels
The Special Issue ‘Physical Metallurgy of High Manganese Steels’ addresses the highly fascinating class of manganese-alloyed steels with manganese contents well above 3 mass%. The book gathers manuscripts from internationally recognized researchers with stimulating new ideas and original results. It consists of fifteen original research papers. Seven contributions focus on steels with manganese contents above 12 mass%. These contributions cover fundamental aspects of process-microstrcuture-properties relationships with processes ranging from cold and warm rolling over deep rolling to heat treatment.
Physiological Responses to Abiotic and Biotic Stress in Forest Trees
As sessile organisms, plants have to cope with a multitude of natural and anthropogenic forms of stress in their environment. Due to their longevity, this is of particular significance for trees. As a consequence, trees develop an orchestra of resilience and resistance mechanisms to biotic and abiotic stresses in order to support their growth and development in a constantly changing atmospheric and pedospheric environment.
Planning, Development and Management of Sustainable Cities
The concept of ‘sustainable urban development’ has been pushed to the forefront of policymaking and politics as the world wakes up to the impacts of climate change and the destructive effects of the Anthropocene. Climate change has emerged to be one of the biggest challenges faced by our planet today, threatening both built and natural systems with long-term consequences, which may be irreversible. While there is a vast body of literature on sustainability and sustainable urban development, there is currently limited focus on how to cohesively bring together the vital issues of the planning, development, and management of sustainable cities.
Yigitcanlar, Tan --- Kamruzzaman, Md. (Liton)
Polarimetric SAR Techniques and Applications
Polarimetry allows sensitivity to the structural and geometric properties of the scene, making it possible a more accurate identification and classification than non-polarimetric systems. Then, polarimetry makes possible new applications, especially in quantitative extraction of bio and geophysical variables. Also, the combination of polarimetry and interferometry allows also to explore the vertical structure of semi-transparent media, like crops and forests. SAR polarimetry is an active field of research in Earth observation. Besides the development of applications, researchers have also focused in theory or physical modelling to make SAR polarimetry an operational technique.
Carlos López-Martínez (Ed.) --- Juan Manuel Lopez-Sanchez (Ed.)
Soil Water Conservation. Dynamics and Impact
Human needs like food and clean water are directly related to good maintenance of healthy and productive soils. A good understanding of human impact on the natural environment is therefore necessary to preserve and manage soil and water resources. This knowledge is particularly important in semi-arid and arid regions, where the increasing demands on limited water supplies require urgent efforts to improve water quality and water use efficiency. It is important to keep in mind that both soil and water are limited resources.
Keesstra, Saskia --- Di Prima, Simone --- Castellini, Mirko --- Pirastru, Mario
Deficiencies in these areas may be remediated by advancements in structural health monitoring (SHM) technologies that provide sensing systems to automatically and economically diagnose structural integrity. In a sense, SHM technologies will help pave the way to intelligent structures that are able to detect damage by themselves and even warn occupants of any danger due to impending structural failure. Engineering sensors and developing smart algorithms for SHM often involves the close collaboration of a surprisingly large breadth of specialties.
Structure and Mechanical Properties of Transition Group Metals, Alloys, and Intermetallic Compounds
The aim of this Special Issue is to present the latest theoretical and experimental achievements concerning the mechanisms of microstructural change in metallic materials subject to different processing methods, and their effect on mechanical properties. It is my pleasure to present a series of compelling scientific papers written by scientists from the community of transition group metals, alloys, and intermetallic compounds.
Sustainability in Construction Engineering
The concept of sustainability has been expanding to all areas of economic activity, including construction. The Special Issue “Sustainability in Construction Engineering” provided a possibility for researchers to disseminate their new ideas and findings related to sustainable decisions in construction engineering as a complex discipline that involves designing, planning, construction and management of infrastructures. The topics raised interest of researchers all over the world and the current Special Issue received a great number of submissions from different institutions, countries and continents.
Edmundas Kazimieras Zavadskas (Ed.) --- Jonas Šaparauskas (Ed.) --- Jurgita Antuchevičienė (Ed.)
This Special Issue of Sustainability reports on recent research aiming to make the freight transport sector more sustainable. The sector faces significant challenges in different domains of sustainability, including the reduction of greenhouse gas emissions and the management of health and safety impacts. In particular, the intention to decarbonise the sector’s activities has led to a strong increase in research efforts—this is also the main focus of the Special Issue. Sustainable freight transport operations represent a significant challenge with multiple technical, operational, and political aspects.
Human development has made remarkable social and economic progress possible for most of us but has also entailed a range of serious impacts on natural resources, local communities and the economy at multiple scales. Thus, achieving sustainable territorial management that combines healthy and prosperous societies with the long-term maintenance of biodiversity and productive ecosystem services remains the biggest challenge of our modern world. This Special Issue seeks to collect a coherent set of studies on techniques and experiences (case studies) aimed at increasing the environmental, social, economic &/or institutional sustainability of landscapes and seascapes from a range of geographic and socioeconomic contexts.
David Rodr´ıguez-Rodr´ıguez (Ed.) --- Javier Mart´ınez-Vega (Ed.)
This book presents interesting samples of theoretical and practical advances of symmetry in multidisciplinary engineering applications. It covers several applications, such as accessibility and traffic congestion management, path planning for mobile robots, analysis of shipment service networks, fault diagnosis methods in electrical circuits and electrical machines, geometrical issues in architecture, geometric modeling and virtual reconstruction, design of noise detectors, filters, and segmentation methods for image processing, and cyclic symmetric structures in turbomachinery applications, to name but a few.
Montoya, Francisco G. --- Baños Navarro, Raúl
Towards Sustainable Global Food Systems. Conceptual and Policy Analysis of Agriculture, Food and Environment Linkages
One of the major knowledge challenges in the domain of Resilient and Sustainable Food Systems refers to the integration of perspectives on consumption, patterns that support public health, inclusive value chains, and environmentally sustainable food production. While there is a long record of the analysis of separate interventions, this special issue generates integrated insights, provides cross-cutting perspectives, and outlines practical and policy solutions that address these global challenges.<false,>
Traditional and Innovative Approaches in Seismic Design
This special issue collects selected papers about a wide range of innovative applications in earthquake engineering. These studies were presented during the 2nd Edition of the International Workshop “Traditional and Innovative Approaches in Seismic Engineering”, held in Pisa in March 2017. The topics refer to the investigation of traditional and innovative materials for earthquake engineering applications: masonry, reinforced concrete, steel, structural glass and timber. In particular, advanced analytical and numerical analyses are described for considering effects of strength and material irregularities and rocking behavior under seismic excitations on historic buildings and industrial facilities
Linda Giresini (ed.) --- Francesca Taddei
The first two-dimensional material studied in detail was graphene, and many groups explored its potential for electronic applications. Meanwhile, researchers have extended their work to two-dimensional materials beyond graphene. At present, several hundred of these materials are known and part of them is considered to be useful for electronic applications.
AC Electrical Circuit Analysis: A Practical Approach
theory and practical application of analysis of AC electrical circuits. It assumes familiarity with DC circuit analysis. If you have not studied DC circuit analysis, it is strongly recommended that you read the companion OER text, DC Electrical Circuit Analysis before continuing. Both texts are offered free of charge under a Creative Commons non-commercial, share-alike with attribution license. For your convenience, along with the free pdf and odt files, print copies are available at a very modest charge. Check my web sites for links. This text is based on the earlier Workbook for AC Electrical Circuits, which it replaces. The original expository text has been greatly expanded and includes many examples along with computer simulations. For the convenience of those who used the Workbook, many of the problem sets are the same, with some re-ordering depending on the chapter.
DC Electrical Circuit Analysis: A Practical Approach
elcome to DC Electrical Circuit Analysis, an open educational resource (OER). The goal of this text is to introduce the theory and practical application of analysis of DC electrical circuits. It is offered free of charge under a Creative Commons non-commercial, share-alike with attribution license. For your convenience, along with the free pdf and odt files, print copies are available at a very modest charge. Check my web sites for links. This text is based on the earlier Workbook for DC Electrical Circuits, which it replaces. The original expository text has been greatly expanded and includes many examples along with computer simulations. For the convenience of those who used the Workbook, many of the problem sets are the same, with some re-ordering depending on the chapter.
This Open Access book, building on research initiated by scholars from the Leiden-Delft-Erasmus Centre for Global Heritage and Development (CHGD) and ICOMOS Netherlands, presents multidisciplinary research that connects water to heritage. Through twenty-one chapters it explores landscapes, cities, engineering structures and buildings from around the world. It describes how people have actively shaped the course, form and function of water for human settlement and the development of civilizations, establishing socio-economic structures, policies and cultures; a rich world of narratives, laws and practices; and an extensive network of infrastructure, buildings and urban form.
Perspectives on European Earthquake Engineering and Seismology: Volume 1
This book collects 5 keynote and 15 topic lectures presented at the 2nd European Conference on Earthquake Engineering and Seismology (2ECEES), held in Istanbul, Turkey, from August 24 to 29, 2014. The conference was organized by the Turkish Earthquake Foundation - Earthquake Engineering Committee and Prime Ministry, Disaster and Emergency Management Presidency under the auspices of the European Association for Earthquake Engineering (EAEE) and European Seismological Commission (ESC). The book’s twenty state-of-the-art papers were written by the most prominent researchers in Europe and address a comprehensive collection of topics on earthquake engineering, as well as interdisciplinary subjects such as engineering seismology and seismic risk assessment and management.
Achieving the Paris Climate Agreement Goals
This open access book presents detailed pathways to achieve 100% renewable energy by 2050, globally and across ten geographical regions. Based on state-of-the-art scenario modelling, it provides the vital missing link between renewable energy targets and the measures needed to achieve them. Bringing together the latest research in climate science, renewable energy technology, employment and resource impacts, the book breaks new ground by covering all the elements essential to achieving the ambitious climate mitigation targets set out in the Paris Climate Agreement. For example, sectoral implementation pathways, with special emphasis on differences between developed and developing countries and regional conditions, provide tools to implement the scenarios globally and domestically
Advancing Culture of Living with Landslides: Volume 1 ISDR-ICL Sendai Partnerships 2015-2025
This volume contains peer-reviewed papers from the Fourth World Landslide Forum organized by the International Consortium on Landslides (ICL), the Global Promotion Committee of the International Programme on Landslides (IPL), University of Ljubljana (UL) and Geological Survey of Slovenia in Ljubljana, Slovenia from May 29 to June 2, 2017. The complete collection of papers from the Forum is published in five full-color volumes.
Kyoji Sassa --- Matjaž Mikoš --- Yueping Yin
AiREAS: Sustainocracy for a Healthy City
Medicine (General) ---, Environmental Technology
This book describes the coming about and first results of the AiREAS "healthy city" cooperative in the city of Eindhoven and Province of North Brabant in the Netherlands. AiREAS is an initiative focused on the multidisciplinary co-creation of healthy cities using the core human value of human health and air quality as guiding principle for profound regional innovation. The unique group process that followed uses the complexity of the city of Eindhoven as living lab.
This open access book presents a comprehensive analysis of biofuel use strategies from an interdisciplinary perspective using sustainability science. This interdisciplinary perspective (social science-natural science) means that the strategies and policy options proposed will have significant impacts on the economy and society alike. Biofuels are expected to contribute to reducing greenhouse gas emissions, revitalizing economies in agricultural communities and alleviating poverty.
Takeuchi, Kazuhiko --- Shiroyama, Hideaki --- Saito, Osamu --- Matsuura, Masahiro
This open access book provides worldwide examples demonstrating the importance of the interplay between demography and disasters in regions and spatially. It marks an advance in practical and theoretical insights for understanding the role of demography in planning for and mitigating impacts from disasters in developed nations. Both slow onset (like the of loss polar ice from climate change) and sudden disasters (such as cyclones and man-made disasters) have the capacity to fundamentally change the profiles of populations at local and regional levels.
Karácsonyi, Dávid --- Taylor, Andrew --- Bird, Deanne
Advances on Mechanics, Design Engineering and Manufacturing III
Engineering Design; Manufacturing, Machines, Tools, Processes; Computer-Aided Engineering (CAD, CAE) and Design; Machines, Tools, Processes; Open Access; Additive Manufacturing; Virtual Prototyping; Eco-design; Generative design; Digitalization in Manufacturing; Reconfigurable Manufacturing Systems; 3D Modeling; Human-machine Interaction; Sustainable redesign; Stress analysis and simulation; Robost design methods; Topological optimization; NES design; Geometric modelling; Smart tightening; Technical design; Production engineering; Computer-aided design (CAD)
Roucoules, Lionel (editor) Paredes, Manuel (editor) Eynard, Benoit (editor) Morer Camo, Paz (editor) Rizzi, Caterina (editor)
Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, JCM 2020, June 2-4, 2020
Engineering Statics: Open and Interactive
Engineering Statics is a free, open-source textbook appropriate for anyone who wishes to learn more about vectors, forces, moments, static equilibrium, and the properties of shapes. Specifically, it has been written to be the textbook for Engineering Mechanics: Statics, the first course in the Engineering Mechanics series offered in most university-level engineering programs.
Basic Concepts of Structural Design for Architecture Students
This book aims to narrate fundamental concepts of structural design to architecture students such that they have minimum involvement with math problem-solving. Within this book, students learn about different types of loads, forces and vector addition, the concept of equilibrium, internal forces, geometrical and material properties of structural elements, and rules of thumb for estimating the proportion of some structural systems such as catenary cables and arches, trusses, and frame structures.
Fundamentals of Aerospace Engineering covers an undergraduate, introductory course to aeronautical engineering and aims at combining theory and practice to provide a comprehensive, thorough introduction to the fascinating, yet complex discipline of aerospace engineering. This book is the ulterior result of three year of teaching a course called Aerospace Engineering in the first year of a degree in aerospace engineering (with a minor in air navigation) at the Universidad Rey Juan Carlos, in Madrid, Spain.
Traffic Flow Theory: An introduction with exercises
Traffic processes cause several problems in the world. Traffic delay, pollution are some of it. They can be solved with the right road design or traffic management (control) measure. Before implementing these designs of measures, though, their effect could be tested. To this end, knowledge of traffic flow theory is needed.
The discipline of Biosystems Engineering emerged in the 1990s from the traditional strongholds of agricultural engineering and food engineering. Biosystems engineering integrates engineering science and design with applied biological, environmental, and agricultural sciences.
American Society of Agricultural and Biological Engineers (ASABE), Virginia Tech Publishing
This book discusses what is currently known about software engineering, based on an analysis of all the publicly available data. This aim is not as ambitious as it sounds, because there is not a great deal of data publicly available. The intent is to provide material that is useful to professional developers working in industry; until recently researchers in software engineering have been more interested in vanity work, promoted by ego and bluster.
This book fosters the recognition of options for making progress toward increased environmental conservation through an understanding of the underlying science and practice of a variety of conservation techniques. Today, there are expected benefits from integrated science and practice, and many people are promoting this as the way forward to improve our environment. Over time, trends emerge regarding the best way to conserve the environment, but so far an outstanding solution has not emerged. Each conservation technique has its foundational concepts, limitations, and implementation issues.
Special Topics in Information Technology
This open access book presents thirteen outstanding doctoral dissertations in Information Technology from the Department of Electronics, Information and Bioengineering, Politecnico di Milano, Italy. Information Technology has always been highly interdisciplinary, as many aspects have to be considered in IT systems. The doctoral studies program in IT at Politecnico di Milano emphasizes this interdisciplinary nature, which is becoming more and more important in recent technological advances, in collaborative projects, and in the education of young researchers.
Introduction to engineering mechanics: statics, for those who love to learn. Concepts include: particles and rigid body equilibrium equations, distributed loads, shear and moment diagrams, trusses, method of joints and sections, & inertia.
Elisabeth (Libby) Osgood, Gayla Cameron, Emma Christensen
Introduction to Mechanical Engineering Design
A collection of readings and exercises aligned with the course, ME 270, Introduction to Mechanical Engineering Design, at Iowa State University. This course provides an overview of mechanical engineering design with applications to thermal and mechanical systems, and an introduction to current design practices used in industry.
Annual Report on the Big Data of New Energy Vehicle in China (2021)
This open access book, based on static indicators and dynamic big data from local electric vehicles, is the first New-Energy Vehicles (NEVs) research report on the Big Data in China. Using the real-time big data collected by China's National Monitoring and Management Platform for NEVs, this book delves into the main annual technological progress of NEVs, the vehicle operating characteristics, it also anticipates the trend of NEVs industry. Various graphs&charts, detailed data this book offers will familiarize readers with the operation characteristics and practical application of China's NEVs industry and popularize the concept of automobile electrification.
3rd International Conference on Thermal Issues in Machine Tools (ICTIMT2023)
This open access conference proceedings contains all the papers presented at the ICTIMT 2023, the 3rd International Conference on Thermal Issues in Machine Tools. The event takes place in Dresden, the capital of Saxony, from March 21-23 2023. The conference is organized by the Chair of Machine Tools Development and Adaptive Controls of the Technische Universität Dresden.
Advances in Frontier Research on Engineering Structures
This is an open access book. This book focuses on the research of advanced structures and anti-seismic in civil engineering. It features the most cutting-edge research directions and achievements related to civil and structural engineering. Subjects in this book include: ·Engineering Structure and Seismic Resistance ·Structural Mechanics Analysis ·Components and Materials ·Structural Seismic Design ·3D Printing Concrete ·Other Related Topics The works of this book promote development of civil and structural engineering, resource sharing, flexibility, and high efficiency. Thereby, it also promotes scientific information interchange between scholars from the top universities, research centers, and high-tech enterprises working all around the world.
Lost Without It: How GPS is more than just navigation
The navigation that we get from GPS is just a tiny component of how it impacts our lives - from banking to mapping to just knowing where stuff is, it's now a critical part of how humanity functions. This book takes you through all the basics of how GPS works, kind of like a how-to, just in case zombies take out all those smart scientists that keep it all running!
Chris McAlister, Deborah King, Samara Hoffmann
Essential Mechanics - Statics and Strength of Materials with MATLAB and Octave
Essential Mechanics - Statics and Strength of Materials with MATLAB and Octave combines two core engineering science courses - “Statics” and “Strength of Materials” - in mechanical, civil, and aerospace engineering. It weaves together various essential topics from Statics and Strength of Materials to allow discussing structural design from the very beginning. The traditional content of these courses are reordered to make it convenient to cover rigid body equilibrium and extend it to deformable body mechanics.The e-book covers the most useful topics from both courses with computational support through MATLAB/Octave.
Structured Electronics Design: A Conceptual Approach to Amplifier Design - 3rd ed.
Many people consider analog electronic circuit design complex. This is because designers can achieve the desired performance of a circuit in many ways. Together, theoretical concepts, circuit topologies, electronic devices, their operating conditions, and the system's physical construction constitute an enormous design space in which it is easy to get lost. For this reason, analog electronics often is regarded as an art rather than a solid discipline.
This open-access book aims to highlight the coming surge of 5G network-based applications and predicts that the centralized networks and their current capacity will be incapable of meeting the demands. The book emphasizes the benefits and challenges associated with the integration of 5G networks with varied applications. Further, the book gathers and investigates the most recent 5G-based research solutions that handle security and privacy threats while considering resource-constrained wireless devices. The information, applications, and recent advances discussed in this book will serve to be of immense help to practitioners, database professionals, and researchers.
Bhushan, Bharat (editor) Sharma, Sudhir Kumar (editor) Kumar, Raghvendra (editor) Priyadarshini, Ishaani (editor)
This open access book focuses on the practical application of Adaptive Dynamic Programming (ADP) in chemotherapy drug delivery, taking into account clinical variables and real-time data. ADP's ability to adapt to changing conditions and make optimal decisions in complex and uncertain situations makes it a valuable tool in addressing pressing challenges in healthcare and other fields. As optimization technology evolves, we can expect to see even more sophisticated and powerful solutions emerge
Sun, Jiayue Xu, Shun Liu, Yang Zhang, Huaguang
Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains
This volume of the series ARENA2036 compiles the outcome of the 2nd Stuttgart Conference on Automotive Production (SCAP2022). The peer-reviewed contributions in this book are arranged thematically in three parts and cover a wide variety of topics: (A) Software-defined Manufacturing, (B) Data-driven Technologies, and (C) Advanced Manufacturing and Sustainability. SCAP2022 was organized by ARENA2036 in close collaboration with the Institute for Control Engineering of Machine Tools and Manufacturing Units of the University of Stuttgart. The Conference took place on site from November 16 - 18, 2022 and provided the opportunity for national and international scientists to present their latest research results.
Kiefl, Niklas (editor) Wulle, Frederik (editor) Ackermann, Clemens (editor) Holder, Daniel (editor)
Radio Systems Engineering - Revised First Edition
Using a systems framework, this textbook provides a clear and comprehensive introduction to the performance, analysis, and design of radio systems for students and practicing engineers. Presented within a consistent framework, the first part of the book describes the fundamentals of the subject: propagation, noise, antennas, and modulation. The analysis and design of radios including RF circuit design and signal processing is covered in the second half of the book.
An Introduction to Waste Management and Circular Economy
This introductory textbook provides an essential interdisciplinary guide to waste management and circular economy. It helps students to understand the drivers of waste, the environmental, social, and economic impacts of waste generation, and best practices and technologies for waste management, recycling, energy recovery and disposal. With helpful, full-colour diagrams throughout, each chapter includes learning objectives, introduction to concepts and themes, exercises and review sections, to guide students through the book. The textbook is ideal for teaching environmental engineering and science, as well as interdisciplinary environmental programmes.
Handbook of Software Engineering Methods - 2nd Edition
Software engineering can help people create sustainable, extensible programs that solve problems people care about. I won’t tell you how to be a software engineer; you’ll learn that over time by doing it. Instead, this book is about software engineering methods: Ways people achieve specific objectives in software engineering—that can save your project. My hope is that, after reading this book (or parts of it), you’ll feel better equipped for software engineering.
Fracture Mechanics: An Engineering Primer - 2nd Edition
In this second edition, which is the result of numerous revisions, updates and additions, the authors cover the basic concepts of fracture mechanics for both the linear elastic and elastic-plastic regimes. The fracture mechanics parameters K, G, J and CTOD are treated in a basic manner along with the test methods to determine critical values. The development of failure assessment based on elastic-plastic fracture mechanics is reflected in a comprehensive treatment.
Michael Janssen, Jan Zuidema, Russell Wanhill,
Counter Unmanned Aircraft Systems Technologies and Operations
Aircraft Systems Technologies and Operations
As the quarter-century mark in the 21st Century nears, new aviation-related equipment has come to the forefront, both to help us and to haunt us. (Coutu, 2020). This is particularly the case with unmanned aerial vehicles (UAVs). These vehicles have grown in popularity and accessible to everyone. Of different shapes and sizes, they are widely available for purchase at relatively low prices. They have moved from the backyard recreation status to important tools for the military, intelligence agencies, and corporate organizations. New practical applications such as military equipment and weaponry are announced on a regular basis – globally. (Coutu, 2020). Every country seems to be announcing steps forward in this bludgeoning field.
Cyber-Human Systems, Space Technologies, and Threats
CYBER-HUMAN SYSTEMS, SPACE TECHNOLOGIES, AND THREATS is our eighth textbook in a series covering the world of UASs / CUAS / UUVs / SPACE. We address the technological future of the merging of cyber-human systems (robots, cyborgs, AI/ML, computers) with humans and apply these innovations to space operations and defense against threats that are concomitant with their development. We look at artificial brains, legality of CHS sensors, AI /ML and Ag and food industry; Neurostrike and CHATGPT, biological threats and growth in space, space EW, modeling, deep space warfare, logistics and dominance; hypersonic missiles, cyber threats in space, machine parts, materials technologies, and economies of scale, quantum technologies impact and finally, innovative wireless power transfer for space applications.
Space Systems: Emerging Technologies and Operations
SPACE SYSTEMS: EMERGING TECHNOLOGIES AND OPERATIONS (SSETO) is our seventh textbook in a series covering the world of UASs / CUAS / UUVs. SSETO takes on a new purview of SPACE. UASs (Drones) have a maximum altitude of about 33,000 ft (10 km) because rotating rotors become physically limiting. (Nichols R. et al., 2019) Between 400 ft and 33,000 ft is in the purview of DREAMERS. In the DREAMERS region, Space has its most interesting technological emergence. We see emerging technologies and operations that may have profound effects on humanity.
Unmanned Vehicle Systems & Operations on Air, Sea, Land
This is our fourth textbook in a series previously covering the world of Unmanned Aircraft Systems (UAS) and Counter Unmanned Aircraft Systems (CUAS). The authors have expanded our purview beyond UAS / CUAS systems. Our title shows our concern for growth and unique operations for all unmanned vehicles in all theaters: Air, Sea and Land.
A Circular Built Environment in the Digital Age
This open access book offers a comprehensive exploration of the digital innovations that have emerged in recent years for the circular built environment. Each chapter is meticulously crafted to ensure that both academic readers and industry practitioners can grasp the inner workings of each digital technology, understand its relevance to the circular built environment, examine real-life implementations, and appreciate the intriguing business models behind them. Our primary objective is to blend scholarly knowledge with practical inspiration by providing real-life case studies for each innovation. The authors, who possess extensive expertise in their respective fields, have contributed chapters dedicated to digital technologies within their areas of specialization. The book is organized into three distinct parts. The first part focuses on data-driven digital technologies and delves into how their capabilities can facilitate the transition to a circular built environment.
De Wolf, Catherine , Çetin, Sultan, Bocken, Nancy M. P.
Electrolysers, Fuel Cells and Batteries: Analytical Modelling
Electrochemical engineering deals with electrochemical devices like electrolysers, fuel cells, and batteries. While several excellent books exist in this long-standing and still growing field, their focus is usually on chemistry or phenomenology. In this textbook, we focus on mathematical modelling of the physical phenomena involved. Instead of resorting to numerical modelling, the aim is to derive simplified analytical models that maximise understanding. Porous electrodes, ion mass transport, and multiphase flow are central themes in this book. Examples include modelling the water saturation in a fuel cell diffusion layer, the gas fraction and current distribution in an alkaline water electrolyser, the potential distribution in a binary electrolyte inside porous battery electrode, and the concentration distribution in the flow channel of a redox flow battery.
Private Pilot for Airplane Category Airman Certification Standards (FAA-S-ACS-6C)
The U.S. Department of Transportation, Federal Aviation Administration (FAA), Office of Safety Standards, Regulatory Support Division, Airman Testing Standards Branch, has published the Private Pilot for Airplane Category Airman Certification Standards (ACS) to communicate the aeronautical knowledge, risk management, and flight proficiency standards for private pilot certification in the airplane category, single-engine land and sea; and multiengine land and sea classes.
This open access book offers a comprehensive exploration of the digital innovations that have emerged in recent years for the circular built environment. Each chapter is meticulously crafted to ensure that both academic readers and industry practitioners can grasp the inner workings of each digital technology, understand its relevance to the circular built environment, examine real-life implementations, and appreciate the intriguing business models behind them. Our primary objective is to blend scholarly knowledge with practical inspiration by providing real-life case studies for each innovation. The authors, who possess extensive expertise in their respective fields, have contributed chapters dedicated to digital technologies within their areas of specialization. The book is organized into three distinct parts.
De Wolf, Catherine (editor) Çetin, Sultan (editor) Bocken, Nancy M. P. (editor)
Introduction to Environmental Sciences and Sustainability
Introduction to Environmental Sciences and Sustainability is a college-level Open Educational Resource (OER) that focuses on the most relevant environmental science issues and addresses ways to incorporate sustainable practices. The text is designed for an introductory-level college science course. Topics include the fundamentals of ecology, biodiversity, pollution, climate change, food production, human population growth, and incorporating sustainable approaches in our communities, economies, and environments. This resource is targeted at environmental science students.
Introduction to Mechanical Design and Manufacturing
This book is an introduction to product design and manufacturing, with a focus on the mechanical engineering aspects. It covers the principles, methods, tools and techniques that are used to create, analyze, optimize and manufacture products that meet the needs and wants of customers. The book is intended for students, educators, practitioners and researchers who are interested in learning about the theory and practice of product design and manufacturing. The book is open access, which means that it is freely available online for anyone to read, download, share and reuse. The book aims to provide a comprehensive and up-to-date overview of the current state of the art in product design and manufacturing, as well as to inspire new ideas and innovations.
This eBook was written as the third installment in the series that coincide with three engineering courses taught at the University of Oklahoma (ENGR 2431, ENGR 2531, and ENGR 3431). These courses were designed to provide non-major students – those not majoring in electrical or computer engineering (ECE) – a foundation in various ECE topics. ENGR 2431 is a prerequisite for both ENGR 2531 and ENGR 3431 and it is recommended that the DC Circuits book be studied prior to beginning the eBooks created for the other two courses.
Why has East Asia emerged as the global leader in green energy industries but—until recently—lagged on carbon emission reduction? What is new and distinctive about East Asia’s approach to the green energy transition? And what does this approach mean for the world? This book provides the first comprehensive account of East Asia’s green energy shift. Through an analysis of the ambitious national strategies of China and South Korea, the authors show how state actors have pursued a distinctively East Asian approach to transforming their energy systems, involving first the rapid creation of new green energy industries and then the coordinated destruction of fossil fuel incumbencies. This approach—described as ‘developmental environmentalism’—is aimed at establishing East Asian economies as leaders in the green industries of the future, while at the same time addressing the pressing environmental, social, and political problems associated with the carbon-intensive industries of the past.
Thurbon, Elizabeth, Kim, Sung-Young, Tan, Hao , Mathews, John A.
Open Signals and Systems Laboratory Exercises - Second Edition
Open Signals and Systems Laboratory Exercises is a collection of lab assignments that have been used in EE 224: Signals and Systems I in the Department of Electrical and Computer Engineering at Iowa State University. These lab exercises have been curated, edited, and presented in a consistent format to improve student learning. This second edition provides a thorough coverage of the MATLAB concepts needed to complete each exercise, and incorporates hardware descriptions and explanations into the exercises that had integrated new lab equipment. A ZIP file containing additional materials is also available.
Electromagnetics, volume 2 by Steven W. Ellingson is a 216-page peer-reviewed open textbook designed especially for electrical engineering students in the third year of a bachelor of science degree program. It is intended as the primary textbook for the second semester of a two-semester undergraduate engineering electromagnetics sequence. The book addresses magnetic force and the Biot-Savart law; general and lossy media; parallel plate and rectangular waveguides; parallel wire, microstrip, and coaxial transmission lines; AC current flow and skin depth; reflection and transmission at planar boundaries; fields in parallel plate, parallel wire, and microstrip transmission lines; optical fiber; and radiation and antennas.
Understanding Acoustics : An Experimentalist’s View of Sound and Vibration
This open access textbook, like Rayleigh’s classic Theory of Sound, focuses on experiments and on approximation techniques rather than mathematical rigor. The second edition has benefited from comments and corrections provided by many acousticians, in particular those who have used the first edition in undergraduate and graduate courses. For example, phasor notation has been added to clearly distinguish complex variables, and there is a new section on radiation from an unbaffled piston. Drawing on over 40 years of teaching experience at UCLA, the Naval Postgraduate School, and Penn State, the author presents a uniform methodology, based on hydrodynamic fundamentals for analysis of lumped-element systems and wave propagation that can accommodate dissipative mechanisms and geometrically-complex media.
Irrigation and Drainage : Recent Advances
Uneven distribution and depletion of good-quality water reserves significantly devastate the agriculture sector. In this scenario, water management as well as efficient irrigation and drainage strategies are primarily required to conserve water resources and enhance farm efficiency. Irrigation and Drainage – Recent Advances provides insights into irrigation methods, scheduling possibilities, and optimal irrigation frequencies. It also discusses management strategies including methods of groundwater recharging and rainwater harvesting, restoration, and modification of drainage networks for manifesting the cropping index. The book presents key aspects and examines the role of Agrovoltaic energy, artificial intelligence, and the Internet of Things (IoT) in the development of smart irrigation systems for sustainable farming.
Sultan, Muhammad (editor), Ahmad, Fiaz (editor)
This edited volume Irrigation Systems and Applications will introduce the reader to new irrigation technology and its diverse applications in modern farming. This work is organized into two distinct sections on 'Irrigation Systems” and 'Irrigation Applications” each offering a unique view into the potential of smart farming practices. From the deployment of hybrid energy-powered systems for smallholder farmers to the revolutionary impact of advanced micro-irrigation techniques, this book presents the reader with the latest trends and innovations in sustainable agriculture. Explore the evolution of rice production in the face of climate change, the enhanced productivity achievable through hydroponics, and the application of geospatial techniques in agricultural resource management.
Sultan, Muhammad (editor), Imran, Muhammad (editor), Ahmad, Fiaz (editor)
Alternating Current Field Measurement Technique for Detection and Measurement of Cracks in Structures
This open access book serves as a comprehensive exploration of Alternating Current Field Measurement (ACFM), encompassing the foundational theory crucial for subsequent chapters, as well as the design and testing of ACFM probes, instruments, and software. Providing guidance and serving as a reference for ACFM instrument development, the text delves into visualization research in ACFM, offering valuable insights for technical engineering applications. Nondestructive testing (NDT) emerges as a pivotal method for detecting and assessing defects, offering support for safety pre-warning and maintenance decisions in industrial structures.
Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2022
This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI).
Schüppstuhl, Thorsten (editor), Tracht, Kirsten (editor),Fleischer, Jürgen (editor)
Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021
Schüppstuhl, Thorsten (editor), Tracht, Kirsten (editor), Raatz, Annika (editor)
This textbook equips advanced undergraduate and graduate students with the knowledge, skills, and multidisciplinary perspectives needed to understand how sustainable mobility and infrastructure can support climate change mitigation and transportation equity for low-income commuters. The textbook is organized into three sections: Sustainability, Transportation Equity, and Planning. Case Studies and Lessons from the North and South. Greenhouse Gas Emissions, Cities, and Mobility. It includes eleven chapters, each featuring discussion questions, reading materials, and in-class exercises designed to help students develop a research paper on transportation.
Ariadna Reyes, Soheil Sharif-Asl, Ladan Mozaffarian,
This textbook and OER material cover tools and basic knowledge required to prepare transportation engineers and planners to contribute towards a carbon-neutral mobility future. In addition, we will explore the potential for vehicle electrification, automation, connectivity, and ridesharing to reduce the carbon impacts of auto mobility. The textbook modules are intended to inform and teach students how to design streets for modes that have almost no carbon emissions. The goal of the textbook is to train engineering students on existing tools and policy levers that can be used to incorporate emerging transportation technologies in a sustainable, equitable, and efficient manner. The course is designed for graduate transportation engineering, and city and regional planning students.
In the technological tide of the 21st century, acoustics—a discipline steeped in history yet bursting with vitality—is advancing at an unprecedented clip, showcasing the immense potential for application across various fields. The book Acoustical Engineering - The Intricate World of Sound Technology reviews and offers an in-depth analysis of the latest research breakthroughs and technological advancements in acoustic engineering over the past few years.
Transportation Policies, Programs and History
This open text features ten chapters addressing leading topics in transportation planning, programs, policies, history and emerging transportation trends.
Ivonne Audirac, Amber Raley, Jenifer Reiner,
Multimodal Transportation Planning introduces readers to the principles and practice of integrated land use and transportation planning. The primary focus of the textbook is on planning for the mobility needs of all transportation system users, with an emphasis on pedestrian, bicycle, automobile, and transit modes. A related focus is on reducing society’s dependence on the automobile for personal travel. Readers of the text will be able to gain knowledge that supports a variety of learning objectives. Key themes and objectives relate to conveying an understanding of the relationship between land use and transportation, the difference between traditional methods and multimodal planning best practices, and the importance of evaluating performance from an accessibility and quality of service perspective.
Peng Chen, Ph.D., Tia Boyd, Kristine Williams
Advanced Construction Technology and Research of Deep-Sea Tunnels
This open access book focuses on cutting-edge construction techniques for deep-sea tunnels. A world leader in construction technology for deep-sea tunnels and large undersea engineering structures, China has in these years completed several world-renowned undersea tunnel projects, such as the undersea tunnel connecting Shenzhen and Zhongshan, and the Shantou Bay undersea tunnel. The nation also boasts mature technology and enviable scientific research achievements in large-scale shield technology and deep-sea soil hydrostatic surveying. This book intends to provide a review of relevant studies on deep-sea tunnel construction for civil engineers around the globe and equip scholars in related fields of research with a deeper insight into this domain through comprehensive analyses of real-world engineering cases and the most up-to-date research results.
Mei, Guoxiong (editor) Xu, Zengguang (editor) Zhang, Fei (editor)
The book provides a comprehensive overview of the up-to-date, practical knowledge in highway engineering. It highlights the latest industry standards and policies, such as the best-value award algorithms in the selection of design-builders, the urban logistics guidelines for the efficiency of goods distribution, and the adoption of a uniform increased service load based on vehicle characteristics.
Microstructure, Characterization and Mechanical Properties of Coal and Coal-Like Materials
In view of the general trend that the development of the global energy industry is oriented toward green, low-carbon, and efficient utilization, scientific research teams in various fields dominated by the coal industry have conducted much research on coal and coal-like materials by borrowing the technologies and concepts of modern materials science and rock mass mechanics, hoping to explore new directions for the high value-added utilization of structural coal resources and the development of new coal-like materials.
Advances in the Characterisation and Remediation of Sites Contaminated with Petroleum Hydrocarbons
This open access book synthesizes important advances in the assessment and management of soil and groundwater systems contaminated with petroleum hydrocarbons, especially in the form of light non-aqueous phase liquids (LNAPLs). LNAPL characterization and remediation is challenging due to the multi-phase, multi-component nature of the problem and the various physical, chemical, and biological processes involved in a dynamic and heterogeneous hydrogeological setting. This book focuses on the current state of practice of LNAPL characterization and remediation and seeks to provide information and a framework that would allow some of these complexities to be better addressed by contaminated land practitioners, researchers, and regulators.
García-Rincón, Jonás (editor) Gatsios, Evangelos (editor) Lenhard, Robert J. (editor) Atekwana, Estella A. (editor) Naidu, Ravi (editor)
Optimal Water Management and Sustainability in Irrigated Agriculture
As the global demand for food continues to rise, it is crucial to ensure that our agricultural practices are sustainable and efficient, especially when it comes to water management in irrigated agriculture. The sustainability of irrigated agriculture requires the efficient management of the available but limited water resources under the existing constraints.
Pantazis E. Georgiou Dimitrios K. Karpouzos
Agricultural Land Use and Rural Development
Agricultural land provides essential goods and services for human society, and it is the basis for ensuring food security and rural development. Under the background of rapid urbanization, population growth, and climate change, the use of agricultural land has intensified and changed on local, regional, and global scales.
Optical Technologies for Advancing Communication, Sensing, and Computing Systems
Applied optics Optical Communication - Engineering
Optical technology is a cornerstone in communication, computing, and sensing. This book aims to explore the dispersion, attenuation, and nonlinear effects that occur as light signals propagate through specialized fibers, while also investigating the emerging and enabling technologies such as optical fiber sensors, quantum computing, free-space optical communication, and photonic crystal-based optical devices.
Sustainable Energy Systems Planning, Integration and Management
Energy systems worldwide are undergoing major transformation as a consequence of the transition towards the widespread use of clean and sustainable energy sources. Basically, this involves massive changes in technical and organizational levels together with tremendous technological upgrades in different sectors ranging from energy generation and transmission systems down to distribution systems.
Behnam Mohammadi-ivatloo, Somayeh Asadi, et.all
Mining Technologies Innovative Development
The present book covers the main challenges, important for future prospects of subsoils extraction as a public effective and profitable business, as well as technologically advanced industry. In the near future, the mining industry must overcome the problems of structural changes in raw materials demand and raise the productivity up to the level of high-tech industries to maintain the profits.
The aim of this reprint is to present current trends and future perspectives in wastewater and waste treatment methods, including economic and environmental assessments. Topics include, but are not limited to, the following:Novel biological, advanced oxidation, and physicochemical wastewater and waste treatment methods;Current trends in wastewater and waste treatment systems;High-environmental-impact waste streams and treatment challenges;The environmental and economic impacts of wastewater and waste treatment methods.
Rheological Measurement Techniques and Analysis Methods
Rheological Measurement Techniques and Analysis Methods provides a comprehensive exploration of modern rheological analysis, offering key insights into the flow and deformation behaviors of complex materials across various industries. This edited volume brings together advanced techniques and methodologies, with a particular focus on real-time measurements, modeling of viscoelastic materials, and practical applications in fields such as plastics and petroleum.
Second Edition of Municipal Wastewater Treatment
Wastewater Treatment History of engineering
Water scarcity is a global issue. Municipal wastewater treatment aims to remove contaminants before releasing the effluent back into the environment. The treated effluent can be repurposed for water reuse and resource recovery initiatives. This reprint explores various aspects of wastewater treatment. Studies address the influence of salts on the photocatalytic degradation of formic acid, the impact of COD in toxic industrial wastewater on nitrification efficiency, and the efficiency of side stream nitrification in two-stage activated sludge plants.
Yung-Tse Hung, Hamidi Abdul Aziz, Issam A. Al-Khatib
Explore the complex field of corrosion engineering with this well-structured guide, a comprehensive resource designed to clarify the complexities of material deterioration. This expert book thoroughly explores the fundamental principles governing corrosion, emphasizing the key processes and critical factors that influence these phenomena. Discover advanced methods for managing corrosion, focusing on smart material selection, innovative design strategies, and creative use of protective coatings.
Strengthening, Corrosion and Protection of High Temperature Structural Materials
High-temperature structural materials are characterized by their high melting point, high-strength and high-temperature creep resistance, low thermal expansion coefficient, and excellent corrosion resistance. Such materials are widely used in metallurgy, chemical applications, aerospace, nuclear reactors, and other situations where extreme environments are encountered. During high-temperature service, high-temperature structural materials are exposed to extremely harsh high-temperature environments, bear mechanical and thermal loads, and are exposed to high-temperature oxidation, erosion, corrosion, etc.
Yingyi Zhang, Shahid Hussain, Awais Ahmad
Fermentation and Bioprocess Engineering Processes
This is the Reprint of the Special Issue of Processes on “Fermentation and Bioprocess Engineering Processes”, contributing 11 interesting and high-quality papers in the broad field of research on fermentation and bioprocess engineering. This convergence of waste utilization and microbial synthesis demonstrates the potential for innovation in the field of biotechnology that promotes resource efficiency and environmental sustainability.
Ali Demirci, Irfan Turhan, Ehsan Mahdinia
Sustainable and Green Technologies for Industrial Chemical Engineering
Today, industrial processes are subject to continuous review to minimize the emission of pollutants, as well as purify the effluents that are produced. Likewise, a continuous review of the raw materials used is necessary to make them more sustainable. This is the objective of this Special Issue; we set out to present examples of industrial processes adapted to these current requirements.
Mechatronics System Design in Medical Engineering
As the healthcare sector adapts to the evolving standards of Industry 4.0, there is a pressing need for more intelligent, automated, and efficient solutions. This evolution demands cutting-edge research that meets the increasing technical and functional requirements of modern medical applications. The integration of advanced mechatronic systems is essential to create value-added products that are not only highly functional, but also seamlessly adaptable to dynamic healthcare environments.
Advanced Research in Shipping Informatics and Communications
The aim of this Special Issue is to provide the reader with an overview of the technological revolution the shipping industry is experiencing through the integration of informatics and digitalization. Shipping 4.0 is leading the industry ahead, embracing new technologies, and, at the same time, facing an evolving cyber security threat landscape. In this Special Issue a number of leading academic and industry experts are providing their insight through published research covering areas including maritime cyber security, additive manufacturing, e-navigation technologies, telecommunications, Artificial Intelligence, and autonomous maritime systems and robotics.
Computational Analysis and Conformational Modeling for Protein Structure and Interaction
Protein structure and interactions underpin the molecular logic of life, driving essential processes such as signal transduction, molecular recognition, and catalysis. Insights into this domain are pivotal for elucidating biological mechanisms, advancing therapeutic discovery, and enabling the rational design of engineered proteins. Experimental approaches notably X-ray crystallography, NMR spectroscopy, and cryo-EM together with recent AI-driven tools such as AlphaFold3, ESMFold, and RoseTTAFold All-Atom, have transformed protein structure determination.
Advances in Diagnostic Analysis, Strategic Management, and Proactive Maintenance of Electrical Equipment
The reliability and safety of modern power systems depend heavily on the optimal performance of electrical equipment. As energy networks become increasingly complex due to the integration of renewable sources and smart grid technologies, the strategies that are used to manage these assets must evolve. This Reprint compiles cutting-edge research and practical case studies dedicated to the lifecycle management of critical power infrastructure. The collected works explore sophisticated diagnostic techniques, including non-invasive sensing, signal processing, and AI-driven fault detection.
Continuous improvement of approaches for dam design engineering and groundwater resource characterization is needed to respond to new environmental challenges brought upon by climate changes and population growth. The book is divided into two sections. The first section deals with dam designs’ technical, socio-economic, and sustainability aspects. The second section covers technical aspects of groundwater resource characterization. We believe the book will be a valuable resource for hydrology, civil engineering, and groundwater professionals.
Dynamic Model-based Analysis of Oxygen Reduction Reaction in Gas Diffusion Electrodes
In this work, the first simulation model of oxygen depolarized cathodes (ODC), which are silver catalyst-based gas diffusion electrodes, is presented that considers the phase equilibrium of the gas-liquid interface and structure-related inhomogeneities in electrolyte distribution. By means of the model it has been identified that mass transport of water and ions in the liquid phase is a crucial factor for electrode performance and how it is influenced by the electrode structure.
Data mining Algorithms and data structures
Algorithms have risen to become one, if not the central technology for producing, circulating, and evaluating knowledge in multiple societal arenas. In this book, scholars from the social sciences, humanities, and computer science argue that this shift has, and will continue to have, profound implications for how knowledge is produced and what and whose knowledge is valued and deemed valid. To attend to this fundamental change, the authors propose the concept of algorithmic regimes and demonstrate how they transform the epistemological, methodological, and political foundations of knowledge production, sensemaking, and decision-making in contemporary societies.