Perspectives on European Earthquake Engineering and Seismology: Volume 2
Perspectives on European Earthquake Engineering and Seismology: Volume 1
General and Civil Engineering --- Materials
This book collects 5 keynote and 15 topic lectures presented at the 2nd European Conference on Earthquake Engineering and Seismology (2ECEES), held in Istanbul, Turkey, from August 24 to 29, 2014. The conference was organized by the Turkish Earthquake Foundation - Earthquake Engineering Committee and Prime Ministry, Disaster and Emergency Management Presidency under the auspices of the European Association for Earthquake Engineering (EAEE) and European Seismological Commission (ESC). The book’s twenty state-of-the-art papers were written by the most prominent researchers in Europe and address a comprehensive collection of topics on earthquake engineering, as well as interdisciplinary subjects such as engineering seismology and seismic risk assessment and management.
General and Civil Engineering --- Technology (General)
Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology.
Blaabjerg, Frede --- Dragicevic, Tomislav --- Davari, Pooya
MDPI - Multidisciplinary Digital Publishing Institute
Sustainability in Construction Engineering
The concept of sustainability has been expanding to all areas of economic activity, including construction. The Special Issue “Sustainability in Construction Engineering” provided a possibility for researchers to disseminate their new ideas and findings related to sustainable decisions in construction engineering as a complex discipline that involves designing, planning, construction and management of infrastructures. The topics raised interest of researchers all over the world and the current Special Issue received a great number of submissions from different institutions, countries and continents.
Edmundas Kazimieras Zavadskas (Ed.) --- Jonas Šaparauskas (Ed.) --- Jurgita Antuchevičienė (Ed.)
This Special Issue is focused on breakthrough developments in the field of biosensors, as well as on the current scientific progress in biomedical signal processing. The papers address innovative solutions in assistance robotics based on bioelectrical signals, including the following: affordable biosensor technology, affordable assistive-robotics devices, new techniques in myoelectric control, and advances in brain–machine interfacing.
Fernando Torres (Ed.) --- Santiago Puente (Ed.) --- Andrés Ubeda (Ed.)
The formation of patterns in subaqueous sediment
This book investigates the formation of subaqueous patterns by means of high-fidelity numerical simulations which resolve all the relevant scales of the flow and the sediment bed. This is required to provide a space- and time-resolved information on the flow field and the sediment bed. Secondly, detailed analysis of the generated data allows to address the different governing mechanisms involved in the formation of patterns as well as to access the validity of various existing models.
Advancing Culture of Living with Landslides: Volume 1 ISDR-ICL Sendai Partnerships 2015-2025
This volume contains peer-reviewed papers from the Fourth World Landslide Forum organized by the International Consortium on Landslides (ICL), the Global Promotion Committee of the International Programme on Landslides (IPL), University of Ljubljana (UL) and Geological Survey of Slovenia in Ljubljana, Slovenia from May 29 to June 2, 2017. The complete collection of papers from the Forum is published in five full-color volumes.
Kyoji Sassa --- Matjaž Mikoš --- Yueping Yin
Traditional and Innovative Approaches in Seismic Design
This special issue collects selected papers about a wide range of innovative applications in earthquake engineering. These studies were presented during the 2nd Edition of the International Workshop “Traditional and Innovative Approaches in Seismic Engineering”, held in Pisa in March 2017. The topics refer to the investigation of traditional and innovative materials for earthquake engineering applications: masonry, reinforced concrete, steel, structural glass and timber. In particular, advanced analytical and numerical analyses are described for considering effects of strength and material irregularities and rocking behavior under seismic excitations on historic buildings and industrial facilities
Linda Giresini (ed.) --- Francesca Taddei
The Delft Sand, Clay and Rock Cutting Model
Sand, clay and rock have to be excavated for a variety of purposes, such as dredging, trenching, mining (including deep sea mining), drilling, tunnel boring and many other applications. Many excavations take place on dry land, but they are also frequently required in completely saturated conditions, and the methods necessary to accomplish them consequently vary widely. This book provides an overview of cutting theories. It begins with a generic model, valid for all types of soil (sand, clay and rock), and continues with the specifics of dry sand, water-saturated sand, clay, atmospheric rock and hyperbaric rock
Clean Energy and Fuel (Hydrogen) Storage
Clean energy and fuel storage are often required for both stationary and automotive applications. Some of these clean energy and fuel storage technologies currently under extensive research and development include hydrogen storage, direct electric storage, mechanical energy storage, solar–thermal energy storage, electrochemical (batteries and supercapacitors), and thermochemical storage. The gravimetric and volumetric storage capacity, energy storage density, power output, operating temperature and pressure, cycle life, recyclability, and cost of clean energy or fuel storage are some of the factors that govern efficient energy and fuel storage technologies for potential deployment in energy harvesting (solar and wind farms) stations and onboard vehicular transportation
Methods and Concepts for Designing and Validating Smart Grid Systems
Energy efficiency and low-carbon technologies are key contributors to curtailing the emission of greenhouse gases that continue to cause global warming. The efforts to reduce greenhouse gas emissions also strongly affect electrical power systems. Renewable sources, storage systems, and flexible loads provide new system controls, but power system operators and utilities have to deal with their fluctuating nature, limited storage capabilities, and typically higher infrastructure complexity with a growing number of heterogeneous components.
Strasser, Thomas --- Rohjans, Sebastian --- Burt, Graeme
Advanced Asphalt Materials and Paving Technologies
There has been significant research progress in the area of pavement materials and paving technologies in the past decade. This includes the use of warm mix asphalt technologies, rubber asphalt, bio asphalt, nanomaterial applications, new construction technologies, innovative concrete materials, as well as the application of mechanistic–empirical pavement design. With all these developments, a collection of peer-reviewed articles with the theme of advanced asphalt materials and paving technologies is necessary for industry, researchers, government agencies, and other stakeholders.
Zhanping You (Ed.) --- Qingli Dai (Ed.) --- Feipeng Xiao (Ed.)
World Green Building Council suggests that health, well-being and productivity should be the next chapter for green building. There is an obvious shift of green building movement from technology-centric towards human-centric, which culminates in recent WELL Building Standard, focusing exclusively on human health and wellness. This special issue aims to push forward the research, discourse and practice of green building towards more human-oriented design solutions.
Influence of elevated temperatures up to 100 °C on the mechanical properties of concrete
Experiments to characterize the effects of moisture content and temperature on the mechanical properties of concrete were conducted. Based on these experiments, a new overall material model capable of predicting the mechanical behaviour of concrete subject to elevated temperatures up to 100 °C was developed. The material model estimates the time, temperature and moisture dependency of the compressive and tensile strength, creep and shrinkage of concrete.
Building information - representationand management
Building information,, representationand management
This book is about the foundations and principles of building information, its representation and management. It does not tell you which software or policies to choose for representing buildings and managing the resulting information. In fact, the book argues that one should not start with practical steps before fully understanding the reasoning behind any such choice. The basis of this reasoning comprises the structure of information and of the representations that contain it, the purposes of managing information in the context of these representations and the processes in which the representations are used; in a nutshell, how information relates to a specific domain. Without adequate reasoning that takes into account all syntactic, semantic and pragmatic aspects, adopting one software or another, implementing one practical measure or another simply subjugates information processing to some prescriptive or proscriptive framework that may be unproductive, incompatible or inappropriate for the domain.
Building Green . Environmental Architects and the Struggle for Sustainability in Mumbai
Building Green explores the experience of environmental architects in Mumbai, one of the world’s most populous and population-dense urban areas and a city iconic for its massive informal settlements, extreme wealth asymmetries, and ecological stresses. Under these conditions, what does it mean to learn, and try to practice, so-called green design? By tracing the training and professional experiences of environmental architects in India’s first graduate degree program in Environmental Architecture, Rademacher shows how environmental architects forged sustainability concepts and practices and sought to make them meaningful through engaged architectural practice. The book’s focus on practitioners offers insights into the many roles that converge to produce this emergent, critically important form of urban expertise. At once activists, scientists, and designers, the environmental architects profiled in Building Green act as key agents of urban change whose efforts in practice are shaped by a complex urban development economy, layered political power relations, and a calculus of when, and how, their expert skills might be operationalized in service of a global urban future.
Climate Change Mitigation and Adaptation—ZEMCH 2016
This book explores the current issues around sustainable design and energy efficiency within the construction industry in both developed and developing countries. Sustainable housing; thermal comfort; daylighting; low-income housing; green roofs; energy efficient retrofitting and photovoltaic façades are some of the subjects discussed in the book.
This book collects 4 keynote and 15 theme lectures presented at the 2nd European Conference on Earthquake Engineering and Seismology (2ECEES), held in Istanbul, Turkey, from August 24 to 29, 2014. The conference was organized by the Turkish Earthquake Foundation - Earthquake Engineering Committee and Prime Ministry, Disaster and Emergency Management Presidency under the auspices of the European Association for Earthquake Engineering (EAEE) and European Seismological Commission (ESC).
Machine Learning and Embedded Computing in Advanced Driver Assistance Systems (ADAS)
This book contains the latest research on machine learning and embedded computing in advanced driver assistance systems (ADAS). It encompasses research in detection, tracking, LiDAR
Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation.
Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation
Timber Engineering - Principles for Design
This comprehensive book provides in-depth knowledge and understanding of design rules according to Eurocode 5. It is based on the first edition of the STEP (Structural Timber Education Programme) series, which was prepared in 1995 by about 50 authors from 14 European countries. The present work updates and extends the STEP compilation and is aimed at students, structural engineers and other timber structure professionals.
Turbulent open channel flow, sediment erosion and sediment transport
This thesis aims to contribute to a better understanding of turbulent open channel flow, sediment erosion and sediment transport. The thesis provides an analysis of high-fidelity data from direct numerical simulation of (i) open channel flow over an array of fixed spheres, (ii) open channel flow with mobile eroding spheres, (iii) open channel flow with sediment transport of many mobile spheres. An immersed boundary method is used to resolve the finite-size particles.
Fundamentals of Infrastructure Management
The authors believe this free of charge book, Fundamentals of Infrastructure Management, will expand the impact of the material and help improve the practice of infrastructure management. By ‘free of charge,’ we mean that the material can be freely obtained, but readers should devote time and effort to mastering the material. We have provided problem assignments for various chapters, and we strongly urge readers to undertake the problems as a learning experience. This book grew out of a decade of co-teaching a course entitled ‘Infrastructure Management’ at Carnegie Mellon University. Our teaching philosophy was to prepare students for work in the field of infrastructure management. We believe that infrastructure management is a professional endeavor and an attractive professional career. The book is co-authored by two accomplished engineers - each representing professional practice, academic research and theoretical evaluation. Their collective strengths are presented throughout the text and serve to support both the practice of infrastructure management and a role for infrastructure management inquiry and search. Importantly, both co-authors have academic research interests (and a number of research publications) on various topics of infrastructure management. That said, the primary audience for this book is expected to be professionals intending to practice infrastructure management, and only secondarily individuals who intend to pursue a career of research in the area. The text draws examples and discusses a wide variety of infrastructure systems, including roadways, telecommunications, power generation, buildings and systems of infrastructure. We have found that some common fundamentals of asset management, analysis tools and informed decision-making are useful for a variety of such systems. Certainly, many infrastructure managers encounter a variety of infrastructure types during their professional careers. Moreover, due to the functional inter-dependencies of different infrastructure systems, it is certainly advantageous for managers of one infrastructure type to understand other types of infrastructure. For example, roadway managers rely upon the power grid for traffic signal operation.
Building Maintenance & Construction: Tools and Maintenance Tasks
Building Maintenance & Construction: Tools and Maintenance Tasks introduces and develops knowledge of basic building maintenance tools and materials, applied skills and techniques, industry health and safety tandards, and preventive maintenance and troubleshooting practices required by employers for entry-level positions in the building trades and facilities maintenance fields.
Active technological development has fuelled rapid growth in the number of Unmanned Aerial Vehicle (UAV) platforms being deployed around the globe. Novel UAV platforms, UAV-based sensors, robotic sensing and imaging techniques, the development of processing workflows, as well as the capacity of ultra-high temporal and spatial resolution data, provide both opportunities and challenges that will allow engineers and scientists to address novel and important scientific questions in UAV and sensor design, remote sensing and environmental monitoring.T
Felipe Gonzalez Toro (Ed.) --- Antonios Tsourdos (Ed.)
ctive technological development has fuelled rapid growth in the number of Unmanned Aerial Vehicle (UAV) platforms being deployed around the globe. Novel UAV platforms, UAV-based sensors, robotic sensing and imaging techniques, the development of processing workflows, as well as the capacity of ultra-high temporal and spatial resolution data, provide both opportunities and challenges that will allow engineers and scientists to address novel and important scientific questions in UAV and sensor design, remote sensing and environmental monitoring.
Presenting very high surface-to-volume ratio, relatively simple processability and low cost, graphene and graphene-related materials were soon identified as promising nanofillers for polymer matrixes. Reports have shown notorious property enhancements for graphene-polymer composites (GPC) at very low filler loadings. Uses of GPC in varied fields, such as energy, electronics, catalysis, separation and purification, biomedicine, aerospace, tribology, etc., have been demonstrated and, in some cases, put into industrial practice. However, challenges still exist
Structural Health Monitoring (SHM) of Civil Structures
At the current time of writing, the American Society of Civil Engineers (ASCE) has awarded American infrastructure a grade of D+, meaning poor and at risk. Part of the reason for the low grade is due to the rapid deterioration of structural integrity and the inability of most places to safely meet future demands. Deficiencies in these areas may be remediated by advancements in structural health monitoring (SHM) technologies that provide sensing systems to automatically and economically diagnose structural integrity.
Gangbing Song (Ed.) --- Chuji Wang (Ed.) --- Bo Wang (Ed.)
Deficiencies in these areas may be remediated by advancements in structural health monitoring (SHM) technologies that provide sensing systems to automatically and economically diagnose structural integrity. In a sense, SHM technologies will help pave the way to intelligent structures that are able to detect damage by themselves and even warn occupants of any danger due to impending structural failure. Engineering sensors and developing smart algorithms for SHM often involves the close collaboration of a surprisingly large breadth of specialties.
Control and Nonlinear Dynamics on Energy Conversion Systems
The ever-increasing need for higher efficiency, smaller size, and lower cost make the analysis, understanding, and design of energy conversion systems extremely important, interesting, and even imperative. One of the most neglected features in the study of such systems is the effect of the inherent nonlinearities on the stability of the system. Due to these nonlinearities, these devices may exhibit undesirable and complex dynamics, which are the focus of many researchers. Even though a lot of research has taken place in this area during the last 20 years, it is still an active research topic for mainstream power engineers.
Iu, Herbert Ho-Ching --- El Aroudi, Abdelali
Advances in Integrated Energy Systems Design, Control and Optimization
In the face of climate change and resource scarcity, energy supply systems are on the verge of a major transformation, which mainly includes the introduction of new components and their integration into the existing infrastructures, new network configurations and reliable topologies, optimal design and novel operation schemes, and new incentives and business models. This revolution is affecting the current paradigm and demanding that energy systems be integrated into multi-carrier energy hubs. It is highly increasing the interactions between today’s energy systems at various scales and future intelligent energy systems, which are able to incorporate an increasing amount renewable energy sources.
Josep M. Guerrero (Ed.) --- Amjad Anvari-Moghaddam (Ed.)
Modern societies cannot function without information and communications technology (ICT) systems. When ICT systems such as electronic government (e-government) systems, e-payment infrastructures, and mobile phone networks fail,users can still access alternative systems based on older technologies, but these alternatives are rapidly disappearing. E-government services are introduced on the Web to improve services to citizens and to free up the human resources needed to tackle the increasing health care requirements of aging populations.
Design and Applications of Coordinate Measuring Machines
Coordinate measuring machines (CMMs) have been conventionally used in industry for 3-dimensional and form-error measurements of macro parts for many years. Ever since the first CMM, developed by Ferranti Co. in the late 1950s, they have been regarded as versatile measuring equipment, yet many CMMs on the market still have inherent systematic errors due to the violation of the Abbe Principle in its design. Current CMMs are only suitable for part tolerance above 10 μm. With the rapid advent of ultraprecision technology, multi-axis machining, and micro/nanotechnology over the past twenty years, new types of ultraprecision and micro/nao-CMMs are urgently needed in all aspects of society
Coordinate measuring machines (CMMs) have been conventionally used in industry for 3-dimensional and form-error measurements of macro parts for many years. Ever since the first CMM, developed by Ferranti Co. in the late 1950s, they have been regarded as versatile measuring equipment, yet many CMMs on the market still have inherent systematic errors due to the violation of the Abbe Principle in its design. Current CMMs are only suitable for part tolerance above 10 μm. With the rapid advent of ultraprecision technology, multi-axis machining, and micro/nanotechnology over the past twenty years, new types of ultraprecision and micro/nao-CMMs are urgently needed in all aspects of society.
Modeling and Practice of Erosion and Sediment Transport under Change
Climate and anthropogenic changes impact the conditions of erosion and sediment transport in rivers. Rainfall variability and, in many places, the increase of rainfall intensity have a direct impact on rainfall erosivity. Increasing changes in demography have led to the acceleration of land cover changes in natural areas, as well as in cultivated areas, and, sometimes, in degraded areas and desertified landscapes. These anthropogenized landscapes are more sensitive to erosion. On the other hand, the increase in the number of dams in watersheds traps a great portion of sediment fluxes, which do not reach the sea in the same amount, nor at the same quality, with consequences on coastal geomorphodynamics.
Mahé, Gil --- Aksoy, Hafzullah --- Meddi, Mohamed
Liquid Crystal on Silicon Devices: Modeling and Advanced Spatial Light Modulation Applications
Liquid Crystal on Silicon (LCoS) has become one of the most widespread technologies for spatial light modulation in optics and photonics applications. These reflective microdisplays are composed of a high-performance silicon complementary metal oxide semiconductor (CMOS) backplane, which controls the light-modulating properties of the liquid crystal layer. State-of-the-art LCoS microdisplays may exhibit a very small pixel pitch (below 4 ?m), a very large number of pixels (resolutions larger than 4K), and high fill factors (larger than 90%). They modulate illumination sources covering the UV, visible, and far IR. LCoS are used not only as displays but also as polarization, amplitude, and phase-only spatial light modulators, where they achieve full phase modulation.
Humidity Sensors. Advances in Reliability, Calibration and Application
Humidity detection has deep significance for the scientific research surrounding medical care and human performance, and the industrial development of agriculture, geography and automated instruments. This special issue aims to showcase some of the advancements in humidity sensor design and calibration, and its applications. The selected papers cover a variety of humidity sensor-related topics including material science, chemistry and industrial engineering.
McCarthy, Peter W. --- Liu, Zhuofu --- Cascioli, Vincenzo
Advanced Construction Technology and Research of Deep-Sea Tunnels
This open access book focuses on cutting-edge construction techniques for deep-sea tunnels. A world leader in construction technology for deep-sea tunnels and large undersea engineering structures, China has in these years completed several world-renowned undersea tunnel projects, such as the undersea tunnel connecting Shenzhen and Zhongshan, and the Shantou Bay undersea tunnel. The nation also boasts mature technology and enviable scientific research achievements in large-scale shield technology and deep-sea soil hydrostatic surveying. This book intends to provide a review of relevant studies on deep-sea tunnel construction for civil engineers around the globe and equip scholars in related fields of research with a deeper insight into this domain through comprehensive analyses of real-world engineering cases and the most up-to-date research results.
Mei, Guoxiong (editor) Xu, Zengguang (editor) Zhang, Fei (editor)
This book presents interesting samples of theoretical and practical advances of symmetry in multidisciplinary engineering applications. It covers several applications, such as accessibility and traffic congestion management, path planning for mobile robots, analysis of shipment service networks, fault diagnosis methods in electrical circuits and electrical machines, geometrical issues in architecture, geometric modeling and virtual reconstruction, design of noise detectors, filters, and segmentation methods for image processing, and cyclic symmetric structures in turbomachinery applications, to name but a few.
Montoya, Francisco G. --- Baños Navarro, Raúl
Innovative Technologies and Services for Smart Cities
A smart city is a modern technology-driven urban area which uses sensing devices, information, and communication technology connected to the internet of things (IoTs) for the optimum and efficient utilization of infrastructures and services with the goal of improving the living conditions of citizens. Increasing populations, lower budgets, limited resources, and compatibility of the upgraded technologies are some of the few problems affecting the implementation of smart cities. Hence, there is continuous advancement regarding technologies for the implementation of smart cities.
Open-source electronics are becoming very popular, and are integrated with our daily educational and developmental activities. At present, the use open-source electronics for teaching science, technology, engineering, and mathematics (STEM) has become a global trend. Off-the-shelf embedded electronics such as Arduino- and Raspberry-compatible modules have been widely used for various applications, from do-it-yourself (DIY) to industrial projects. In addition to the growth of open-source software platforms, open-source electronics play an important role in narrowing the gap between prototyping and product development. Indeed, the technological and social impacts of open-source electronics in teaching, research, and innovation have been widely recognized.
Sustainable Living with Environmental Risks
General and Civil Engineering --- Materials -
We are not free from environmental risks that accompany the development of human societies. Modern economic development has accelerated environmental pollution, caused loss of natural habitats, and modified landscapes. These environmental changes have impacted natural systems: water and heat circulation, nutrient cycling, and biodiversity. These changes in natural systems degrade ecosystem services and subsequently increase environmental risks for humans. Environmental risks, therefore, are not only human health risks by pollution, climatic anomalies and natural disasters, but also degradation of ecosystem services on which most people are relying for their lives.
Nobuhiro Kaneko --- Shinji Yoshiura --- Masanori Kobayashi
Sustainable Manufacturing: Challenges, Solutions and Implementation Perspectives
This edited volume presents the research results of the Collaborative Research Center 1026 “Sustainable manufacturing - shaping global value creation”. The book aims at providing a reference guide of sustainable manufacturing for researchers, describing methodologies for development of sustainable manufacturing solutions. The volume is structured in four chapters covering the following topics: sustainable manufacturing technology, sustainable product development, sustainable value creation networks and systematic change towards sustainable manufacturing. The target audience comprises both researchers and practitioners in the field of sustainable manufacturing, but the book may also be beneficial for graduate students.
Heat and Mass Transfer in Building Energy Performance Assessment
The building industry is influenced by many factors and trends reflecting the current situation and developments in social, economic, technical, and scientific fields. One of the most important trends seeks to minimize the energy demand. This can be achieved by promoting the construction of buildings with better thermal insulating capabilities of their envelopes and better efficiency in heating, ventilation, and air conditioning systems.
Robert Černý Sciprofile link ,Ákos Lakatos Sciprofile link andVáclav Kočí Sciprofile link (Eds.)
Aeroacustic and Vibroacoustic Advancement in Aerospace and Automotive Systems
The purpose of this special issue is to highlight the latest advances in vibroacoustics and aeroacoustics applied to aerospace and automotive industries. In proposing this wide topic, we wanted to give scientists and engineers the opportunity to publish their studies of current interest, both in the theoretical and experimental fields of vibration, sound generation, and radiation; and passive and active noise control approaches, which can be of interest for assessing vibroacoustics characteristics of aerospace and automotive vehicles
Roberto Citarella (Ed.) --- Luigi Federico (Ed.)
Managing the Complexity of Critical Infrastructures: A Modelling and Simulation Approach
This book summarizes work being pursued in the context of the CIPRNet (Critical Infrastructure Preparedness and Resilience Research Network) research project, co-funded by the European Union under the Seventh Framework Programme (FP7). The project is intended to provide concrete and on-going support to the Critical Infrastructure Protection (CIP) research communities, enhancing their preparedness for CI-related emergencies, while also providing expertise and technologies for other stakeholders to promote their understanding and mitigation of the consequences of CI disruptions, leading to enhanced resilience.
Roberto Setola --- Vittorio Rosato --- Elias Kyriakides --- Erich Rome
Non-destructive Testing of Materials in Civil Engineering
This book was proposed and organized as a means to present recent developments in the field of nondestructive testing of materials in civil engineering. For this reason, the articles highlighted in this editorial relate to different aspects of nondestructive testing of different materials in civil engineering—from building materials to building structures. The current trend in the development of nondestructive testing of materials in civil engineering is mainly concerned with the detection of flaws and defects in concrete elements and structures, and acoustic methods predominate in this field.
Traffic Flow Theory: An introduction with exercises
Traffic processes cause several problems in the world. Traffic delay, pollution are some of it. They can be solved with the right road design or traffic management (control) measure. Before implementing these designs of measures, though, their effect could be tested. To this end, knowledge of traffic flow theory is needed.
Kernel Methods and Hybrid Evolutionary Algorithms in Energy Forecasting
The development of kernel methods and hybrid evolutionary algorithms (HEAs) to support experts in energy forecasting is of great importance to improving the accuracy of the actions derived from an energy decision maker, and it is crucial that they are theoretically sound. In addition, more accurate or more precise energy demand forecasts are required when decisions are made in a competitive environment. Therefore, this is of special relevance in the Big Data era. These forecasts are usually based on a complex function combination. These models have resulted in over-reliance on the use of informal judgment and higher expense if lacking the ability to catch the data patterns.
Introduction To Linear, Time-Invariant, Dynamic Systems For Students Of Engineering
Permission of the author is granted for reproduction in any form of this book or any part of this book, provided that there is appropriate attribution, for example, by a citation in the References section of a technical article, and provided that the reproduction is not made for the purpose of charging a fee to users (e.g., students in a class) beyond the cost of reproduction. However, plagiarism from this book is prohibited, and any use of the material in this book to produce profit or income beyond the cost of reproduction is prohibited.
Department of Aerospace and Ocean Engineering (AOE)
Planning the Charging Infrastructure for Electric Vehicles in Cities and Regions
Planning the charging infrastructure for electric vehicles (EVs) is a new challenging task. This book treats all involved aspects: charging technologies and norms, interactions with the electricity system, electrical installation, demand for charging infrastructure, economics of public infrastructure provision, policies in Germany and the EU, external effects, stakeholder cooperation, spatial planning on the regional and street level, operation and maintenance, and long term spatial planning.
Advances in Frontier Research on Engineering Structures
This is an open access book. This book focuses on the research of advanced structures and anti-seismic in civil engineering. It features the most cutting-edge research directions and achievements related to civil and structural engineering. Subjects in this book include: ·Engineering Structure and Seismic Resistance ·Structural Mechanics Analysis ·Components and Materials ·Structural Seismic Design ·3D Printing Concrete ·Other Related Topics The works of this book promote development of civil and structural engineering, resource sharing, flexibility, and high efficiency. Thereby, it also promotes scientific information interchange between scholars from the top universities, research centers, and high-tech enterprises working all around the world.
Advanced DSP Techniques for High-Capacity and Energy-Efficient Optical Fiber Communications
The rapid proliferation of the Internet has been driving communication networks closer and closer to their limits, while available bandwidth is disappearing due to an ever-increasing network load. Over the past decade, optical fiber communication technology has increased per fiber data rate from 10 Tb/s to exceeding 10 Pb/s. The major explosion came after the maturity of coherent detection and advanced digital signal processing (DSP).
A topic of utmost importance in civil engineering is finding optimal solutions throughout the life cycle of buildings and infrastructural objects, including their design, manufacturing, use, and maintenance. Operational research, management science, and optimization methods provide a consistent and applicable groundwork for engineering decision-making. These topics have received the interest of researchers and, after a rigorous peer-review process, eight papers have been published in this Special Issue.
Development and Application of Nonlinear Dissipative Device in Structural Vibration Control
This book entitled Development and Application of Nonlinear Dissipative Device in Structural Vibration Control contains contributions that focus on the development and application of innovative nonlinear dissipative systems that mitigate the potentially catastrophic effects of extreme loading by incorporating new materials or effective mechanical control technologies. Moreover, new nonlinear analytical methods for distinctive vibrating structures under different excitations are also highlighted in this book.
Zheng Lu (Ed.) --- Tony Yang (Ed.) --- Ying Zhou (Ed.) --- Angeliki Papalou (Ed.)
This open access book disseminates some of the results of the European H2020 AiRT Project (Technology transfer of RPAs for the creative industry). In particular, it presents findings related to mitigating safety and security concerns when civil drones are piloted by the service sector (mainly, the creative industry). European policies regarding drones generally focus on outdoor drones, but they are also used indoors. Moreover, a number of European countries have fragmented regulations on drone use, and as a result, European institutions are attempting address these issues. This work is based on a detailed study of the European policies, a comparative analysis of the regulation in various European countries, an analysis of the drone sector in Europe, and primary data from members of the creative industry. The authors created focus groups in Spain, the UK and Belgium in order to discuss with the creative industry the concerns on safety and security when using civil drones for their work. Based on these results, the book offers advice to the European industry, as well as new insights for academics and policymakers.